kickstart internals

All former posts from our original WWWBoard forum are here

Moderators: smurph, rztom

Locked
Message
Author
wolfgang

kickstart internals

#1 Post by wolfgang » Sat Oct 22, 2005 6:37 am

Hi,<br>can anybody offer me the 2 springs and balls from the kickstart? Lost mine and cant source the right size.<br>Looking forward to your offers!
<br>
<br><hr size=3 width=75%><p>


wolfgang_hromada@aon.at

Wyn BElorusky

Re: kickstart internals

#2 Post by Wyn BElorusky » Sun Oct 23, 2005 3:21 pm

I found the same thing at my local hardware store for about a dollar!
<br>
<br><hr size=3 width=75%><p>


RZVWyn@aol.com

Andy

Re: kickstart internals

#3 Post by Andy » Mon Oct 24, 2005 6:12 am

You need a push click pen, thats where you get the spring from, you'll just have to check a few pens so you can get a good spring and then look for a small bearing with the right size ball bearings... <br>Mine is still gonig strong after this mod and still no problems.<br>Hope this helps<br>Andrew
<br>
<br><hr size=3 width=75%><p>


andrew.lord@vacon.co.uk

Locked