OW69 Fuel Tank question - Bodywork Molds?
Moderator: rztom
-
- Posts: 117
- Joined: Sun Nov 14, 2010 3:14 pm
- Location: Gloucestershire
Fairing
Johnny
looking forward to seeing the fairing kit for the rzv500 especially interseted if it comes complete with a fitting kit. Is the idea to do a yzr style fairing or will it be a copy of the original.
Have you got a web site.
regards
Rich.
looking forward to seeing the fairing kit for the rzv500 especially interseted if it comes complete with a fitting kit. Is the idea to do a yzr style fairing or will it be a copy of the original.
Have you got a web site.
regards
Rich.
Rich B
Re: Fairing
Hi Rich,rich bullock wrote:Johnny
looking forward to seeing the fairing kit for the rzv500 especially interseted if it comes complete with a fitting kit. Is the idea to do a yzr style fairing or will it be a copy of the original.
Have you got a web site.
regards
Rich.
Thanks for your interest.
The YZR parts will be copy of OWD3 1991 Bike
http://www.mcnews.com.au/Wallpaper/Yama ... 3_800p.jpg
Fitted to RZV, however it will need to be modified to fit around the carbs/filters, ect but I will try to keep it as close as possible to original look.
I will make a fitting kit and then see how cost effective it is to produce.
Also the OW69 fairing will be as close as possible to original, however this will need a bit of work blending 2 fairings together then reshaping them, as I cant get an original fairing, unless anyone knows different? if so please let me know as it will save me a lot of extra time & work.
Best regards
Johnny C
Sorry no website as yet, but its being made,
here is a link to some parts:-
http://s695.photobucket.com/albums/vv31 ... ?start=all
if you need any more information please just ask.
Re: Fairing
Johnny, do you already have a master for the OWD3 fairing? If not, I have 4 copies made off a factory bike that has already been widened for the RZ500 frame.peddrotzr wrote:Hi Rich,rich bullock wrote:Johnny
looking forward to seeing the fairing kit for the rzv500 especially interseted if it comes complete with a fitting kit. Is the idea to do a yzr style fairing or will it be a copy of the original.
Have you got a web site.
regards
Rich.
Thanks for your interest.
The YZR parts will be copy of OWD3 1991 Bike
http://www.mcnews.com.au/Wallpaper/Yama ... 3_800p.jpg
Fitted to RZV, however it will need to be modified to fit around the carbs/filters, ect but I will try to keep it as close as possible to original look.
I will make a fitting kit and then see how cost effective it is to produce.
Also the OW69 fairing will be as close as possible to original, however this will need a bit of work blending 2 fairings together then reshaping them, as I cant get an original fairing, unless anyone knows different? if so please let me know as it will save me a lot of extra time & work.
Best regards
Johnny C
I can let you have one set to work with on your kit. If you want it perhaps we can do a parts for labour exchange on the OW69 project.
Regards,
Paul
CBR1000RR SP2 HRC WSBK
TZ500V/OW53 Track bike
YZR500 OW81 Clone
OW69 Daytona 200 Replica - 784cc Monster
NS400 Track Bike
RS250R NF5
TZ250T 2KM
TZ250B 3YL
TZR250 3MA Track Bike
427ci C5 Z07
TZ500V/OW53 Track bike
YZR500 OW81 Clone
OW69 Daytona 200 Replica - 784cc Monster
NS400 Track Bike
RS250R NF5
TZ250T 2KM
TZ250B 3YL
TZR250 3MA Track Bike
427ci C5 Z07
Hi RC45,
Glad that it worked out so well fitting the new bike, yep it does look like the OW68/69.
so I take it that you need the fairing now?
I thought that their wasnt any rush!
I will contact you later in the week or over the weekend as to your kind offer sorting out the body work for the YRZ project,
Thanks for the kind comments.
Best regards
Johnny C.
Glad that it worked out so well fitting the new bike, yep it does look like the OW68/69.
so I take it that you need the fairing now?
I thought that their wasnt any rush!
I will contact you later in the week or over the weekend as to your kind offer sorting out the body work for the YRZ project,
Thanks for the kind comments.
Best regards
Johnny C.
Hehe.peddrotzr wrote:Hi RC45,
Glad that it worked out so well fitting the new bike, yep it does look like the OW68/69.
so I take it that you need the fairing now?
I thought that their wasnt any rush!
I will contact you later in the week or over the weekend as to your kind offer sorting out the body work for the YRZ project,
Thanks for the kind comments.
Best regards
Johnny C.
No pressure sir.
I was just mocking up to see how it looks alongside the underbraced swingarm. I am still doing this bike up as an OW81/86.
To allow you all the time you need for the OW60/9 fairing, I was going to pair your tailpiece with a TZ250H fairing to do a Barry Sheene OW53 replica on the perimeter frame bike until the OW60/9 stuff is ready to go.
CBR1000RR SP2 HRC WSBK
TZ500V/OW53 Track bike
YZR500 OW81 Clone
OW69 Daytona 200 Replica - 784cc Monster
NS400 Track Bike
RS250R NF5
TZ250T 2KM
TZ250B 3YL
TZR250 3MA Track Bike
427ci C5 Z07
TZ500V/OW53 Track bike
YZR500 OW81 Clone
OW69 Daytona 200 Replica - 784cc Monster
NS400 Track Bike
RS250R NF5
TZ250T 2KM
TZ250B 3YL
TZR250 3MA Track Bike
427ci C5 Z07
The late model TZ500 fairing is pretty much the same as the OW53/54 fairing. Close enough to serve as a great replica.mpazo wrote:Hi Peddrotzr, I would like to know if you´ve available an OW54 set of fairings to match this tail unit.
I already got a tail from a Harris F1 RD500, but couldn´t still get the fairings.
Thanks so much.
CBR1000RR SP2 HRC WSBK
TZ500V/OW53 Track bike
YZR500 OW81 Clone
OW69 Daytona 200 Replica - 784cc Monster
NS400 Track Bike
RS250R NF5
TZ250T 2KM
TZ250B 3YL
TZR250 3MA Track Bike
427ci C5 Z07
TZ500V/OW53 Track bike
YZR500 OW81 Clone
OW69 Daytona 200 Replica - 784cc Monster
NS400 Track Bike
RS250R NF5
TZ250T 2KM
TZ250B 3YL
TZR250 3MA Track Bike
427ci C5 Z07
Do you know where to get a set of fairings like these?RC45 wrote:The late model TZ500 fairing is pretty much the same as the OW53/54 fairing. Close enough to serve as a great replica.mpazo wrote:Hi Peddrotzr, I would like to know if you´ve available an OW54 set of fairings to match this tail unit.
I already got a tail from a Harris F1 RD500, but couldn´t still get the fairings.
Thanks so much.
Thanks!
There are a number of companies in Europe and the US that make/sell TZ500 fairings and components.mpazo wrote:Do you know where to get a set of fairings like these?RC45 wrote:The late model TZ500 fairing is pretty much the same as the OW53/54 fairing. Close enough to serve as a great replica.mpazo wrote:Hi Peddrotzr, I would like to know if you´ve available an OW54 set of fairings to match this tail unit.
I already got a tail from a Harris F1 RD500, but couldn´t still get the fairings.
Thanks so much.
Thanks!
Try Mead Speed, Fondseca or even Airtech. I am sure there are others, these are the ones I have dealt with.
CBR1000RR SP2 HRC WSBK
TZ500V/OW53 Track bike
YZR500 OW81 Clone
OW69 Daytona 200 Replica - 784cc Monster
NS400 Track Bike
RS250R NF5
TZ250T 2KM
TZ250B 3YL
TZR250 3MA Track Bike
427ci C5 Z07
TZ500V/OW53 Track bike
YZR500 OW81 Clone
OW69 Daytona 200 Replica - 784cc Monster
NS400 Track Bike
RS250R NF5
TZ250T 2KM
TZ250B 3YL
TZR250 3MA Track Bike
427ci C5 Z07
Thanks so much for your help. I´ve been looking at the differents companies sites, but I wasn´t able to find the correct set of fairings.RC45 wrote:There are a number of companies in Europe and the US that make/sell TZ500 fairings and components.
Try Mead Speed, Fondseca or even Airtech. I am sure there are others, these are the ones I have dealt with.
They seem to produce the earlier TZ500 set, but not the later one.
Where did you finally get yours? I would even be interested in the OW69 ones.