NS400R Parts Needed
Moderator: rztom
NS400R Parts Needed
Anyone know of any north American Crankshaft refurbishers for the NS???
While there are great people accross the pond (that I'm already using for many bits) I was hoping to have the crank rebuilt over here.....
Any ideas??
Thanks kindly!
Mark
While there are great people accross the pond (that I'm already using for many bits) I was hoping to have the crank rebuilt over here.....
Any ideas??
Thanks kindly!
Mark
Re: NS400R Parts Needed
As I have worked on the South African version I am just telling you in case you don't know they are only 373cc not 387cc. This was done so bikes could race in a particular production bike class we ran there
Re: NS400R Parts Needed
Hi Mark
I was in the same situation as you a few years ago. It was cheaper for me to throw the dice and get a used engine from japan. You may still be able to get a roller from japan at a descent price. If I remember I ended up picking one up with shipping for less than $400.00
I was in the same situation as you a few years ago. It was cheaper for me to throw the dice and get a used engine from japan. You may still be able to get a roller from japan at a descent price. If I remember I ended up picking one up with shipping for less than $400.00
1991 3MATZR250SP
!993 3XVTZR250SP
1996 RGV250(Lucky Strike)
1994 MC28SP
1995 MC28SP
1996 MC28SP
1985 RG500(Walter Wolfe)
1984 IT490
1985 RZV500R
1985 NS400R
1985 NS400R
1997 VFR750
1992 FZR1000
RGV400
TZR500
TZR350
1990 RZ350
1971 Porsche911S
!993 3XVTZR250SP
1996 RGV250(Lucky Strike)
1994 MC28SP
1995 MC28SP
1996 MC28SP
1985 RG500(Walter Wolfe)
1984 IT490
1985 RZV500R
1985 NS400R
1985 NS400R
1997 VFR750
1992 FZR1000
RGV400
TZR500
TZR350
1990 RZ350
1971 Porsche911S
Re: NS400R Parts Needed
Contact Karl at http://www.rg500.com" onclick="window.open(this.href);return false; store websiteMBevans wrote:Anyone know of any north American Crankshaft refurbishers for the NS???
While there are great people accross the pond (that I'm already using for many bits) I was hoping to have the crank rebuilt over here.....
Any ideas??
Thanks kindly!
Mark
He has had cranks rebuilt for NS400Rs for his customers and supplies the special bearings with the roll pins.
He is in Cali
The crank seals are a bitch to get.
Contact Ian Wright for seals or a reconditioned crank ready to go.
http://www.classicracereplicas.com/Hond ... Parts-660/
Colin
-
- - - - - -
- Posts: 3240
- Joined: Sat Feb 04, 2012 7:36 am
Re: NS400R Parts Needed
The original post was 4 years ago
Re: NS400R Parts Needed
And the status of crank center bearings is no better than it was.silverstrom wrote:The original post was 4 years ago
I have managed to locate 6 sets of outside seals, but the center seals still elude me.
CBR1000RR SP2 HRC WSBK
TZ500V/OW53 Track bike
YZR500 OW81 Clone
OW69 Daytona 200 Replica - 784cc Monster
NS400 Track Bike
RS250R NF5
TZ250T 2KM
TZ250B 3YL
TZR250 3MA Track Bike
427ci C5 Z07
TZ500V/OW53 Track bike
YZR500 OW81 Clone
OW69 Daytona 200 Replica - 784cc Monster
NS400 Track Bike
RS250R NF5
TZ250T 2KM
TZ250B 3YL
TZR250 3MA Track Bike
427ci C5 Z07
Re: NS400R Parts Needed
Centre seals are the easiest to get. Ian Wright had a new batch made by NOK. They have the seating lip of the Honda item. http://www.classicracereplicas.com/Mobi ... rod_ID=322RC45 wrote:And the status of crank center bearings is no better than it was.silverstrom wrote:The original post was 4 years ago
I have managed to locate 6 sets of outside seals, but the center seals still elude me.
He also does crank bearings.
http://www.classicracereplicas.com/Mobi ... rod_ID=362
Re: NS400R Parts Needed
Thanks All!
Still completing this little project. Like some projects it got sidelined and other projects have gotten finished.
The engine is just about finished, doing the chassis which is also about done.
Classic Replicas has made a bunch off of $$$$ off of me.
Fun little bike, still not as cool as my old 1985 RD500LC that I brought back from Europe in the day new in a crate, missing the RD!!!
Still completing this little project. Like some projects it got sidelined and other projects have gotten finished.
The engine is just about finished, doing the chassis which is also about done.
Classic Replicas has made a bunch off of $$$$ off of me.
Fun little bike, still not as cool as my old 1985 RD500LC that I brought back from Europe in the day new in a crate, missing the RD!!!
1978 TZ750, sold
1979 AMA #1 TZ750 Sidecar
1985 Modified RD500 from new till 1993 sold and sad
1985 Honda NS400R (current project)
1979 AMA #1 TZ750 Sidecar
1985 Modified RD500 from new till 1993 sold and sad
1985 Honda NS400R (current project)