Clutch adjusting tool
Moderator: rztom
Clutch adjusting tool
Thought I would share the tool I made to adjust the clutch pushrod end float. Allows a Phillips screwdriver to be used. Just a regular 12mm deep socket and an old 1/4" socket handle. I will weld the 2 together, rather than rely on the current press-fit.
- Attachments
-
- image.jpg (127.13 KiB) Viewed 1287 times
- jackson.40
- *****
- Posts: 2328
- Joined: Fri Dec 30, 2005 7:01 pm
- Location: Cambridge,UK
Re: Clutch adjusting tool
nice idea