Page 1 of 1

Regarding part# 9033847102 and 9033842165

Posted: Wed Jun 14, 2017 6:16 pm
by torp68
Hi

Regarding part numbers 9033847102 and 9033842165 on this link:
https://www.cmsnl.com/yamaha-rd500lc-19 ... ml#results" onclick="window.open(this.href);return false;
Its part #23 and #30 in the picture.

I understand these have been NLA from Yamaha for a long time.
Anybody know if they are available anywhere at all? Any good substitutes...?

Oyvind

Re: Regarding part# 9033847102 and 9033842165

Posted: Wed Jun 14, 2017 6:33 pm
by WVWRZ500N
torp68 wrote:Hi

Regarding part numbers 9033847102 and 9033842165 on this link:
https://www.cmsnl.com/yamaha-rd500lc-19 ... ml#results" onclick="window.open(this.href);return false;
Its part #23 and #30 in the picture.

I understand these have been NLA from Yamaha for a long time.
Anybody know if they are available anywhere at all? Any good substitutes...?

Oyvind
Reuse the original #30 oil seal plug that goes on the end of the balancer shaft. You can opt to reuse the crank plug seal also but use some sealant around the lip when installing. If you need a new one email me direct as I have some.

Re: Regarding part# 9033847102 and 9033842165

Posted: Mon Jun 19, 2017 1:08 am
by jackson.40
You can get new ones in this kit................................


http://www.ebay.com/itm/RZ500-Crank-sea ... JQ&vxp=mtr" onclick="window.open(this.href);return false;


Steve

Re: Regarding part# 9033847102 and 9033842165

Posted: Mon Jun 19, 2017 1:27 am
by silverstrom
I believe that is Gus's son.

Re: Regarding part# 9033847102 and 9033842165

Posted: Mon Jun 19, 2017 11:19 am
by WVWRZ500N
silverstrom wrote:I believe that is Gus's son.
It is.