Regarding part# 9033847102 and 9033842165

General forum on engines, transmissions, gearing and modifications to each

Moderator: rztom

Post Reply
Message
Author
torp68
- - - - -
- - - - -
Posts: 34
Joined: Thu May 19, 2016 10:55 am

Regarding part# 9033847102 and 9033842165

#1 Post by torp68 » Wed Jun 14, 2017 6:16 pm

Hi

Regarding part numbers 9033847102 and 9033842165 on this link:
https://www.cmsnl.com/yamaha-rd500lc-19 ... ml#results" onclick="window.open(this.href);return false;
Its part #23 and #30 in the picture.

I understand these have been NLA from Yamaha for a long time.
Anybody know if they are available anywhere at all? Any good substitutes...?

Oyvind

User avatar
WVWRZ500N
- - - - -
- - - - -
Posts: 967
Joined: Sat Nov 19, 2005 1:15 am
Location: Lee's Summit, MO
Contact:

Re: Regarding part# 9033847102 and 9033842165

#2 Post by WVWRZ500N » Wed Jun 14, 2017 6:33 pm

torp68 wrote:Hi

Regarding part numbers 9033847102 and 9033842165 on this link:
https://www.cmsnl.com/yamaha-rd500lc-19 ... ml#results" onclick="window.open(this.href);return false;
Its part #23 and #30 in the picture.

I understand these have been NLA from Yamaha for a long time.
Anybody know if they are available anywhere at all? Any good substitutes...?

Oyvind
Reuse the original #30 oil seal plug that goes on the end of the balancer shaft. You can opt to reuse the crank plug seal also but use some sealant around the lip when installing. If you need a new one email me direct as I have some.
Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com

User avatar
jackson.40
*****
*****
Posts: 2328
Joined: Fri Dec 30, 2005 7:01 pm
Location: Cambridge,UK

Re: Regarding part# 9033847102 and 9033842165

#3 Post by jackson.40 » Mon Jun 19, 2017 1:08 am

You can get new ones in this kit................................


http://www.ebay.com/itm/RZ500-Crank-sea ... JQ&vxp=mtr" onclick="window.open(this.href);return false;


Steve

silverstrom
- - - - -
- - - - -
Posts: 3236
Joined: Sat Feb 04, 2012 7:36 am

Re: Regarding part# 9033847102 and 9033842165

#4 Post by silverstrom » Mon Jun 19, 2017 1:27 am

I believe that is Gus's son.

User avatar
WVWRZ500N
- - - - -
- - - - -
Posts: 967
Joined: Sat Nov 19, 2005 1:15 am
Location: Lee's Summit, MO
Contact:

Re: Regarding part# 9033847102 and 9033842165

#5 Post by WVWRZ500N » Mon Jun 19, 2017 11:19 am

silverstrom wrote:I believe that is Gus's son.
It is.
Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com

Post Reply