So I couldn't find any carb clamps to buy
So I had a go at making my own ,,
[img][IMG]http://i28.photobucket.com/albums/c222/ ... image.jpeg[/img][/img]c
Home made carb clamps
Moderator: rztom
Home made carb clamps
- Attachments
-
- image.jpeg (51.59 KiB) Viewed 1703 times
-
- image.jpeg (38.72 KiB) Viewed 1709 times
-
- image.jpeg (38.72 KiB) Viewed 1709 times
Re: Home made carb clamps
That's pretty cool! I think I'm using RD400 clamps with a really long screwdriver. They work, but they are a pain in the butt to get to.
Re: Home made carb clamps
Just to add to this , I tried them with
The carbs and heat shields on and they
could do with being about 20mm longer
so I've orded some M4 x100 mm ,
hope this helps cheers
Andy
The carbs and heat shields on and they
could do with being about 20mm longer
so I've orded some M4 x100 mm ,
hope this helps cheers
Andy
Re: Home made carb clamps
Are those spacers between the manifolds and the block? I don't remember seeing them on my friends engine...
Tony
Tony
Re: Home made carb clamps
Tony, those 'spacers' are the reed blocks which the RD engine uses.
Re: Home made carb clamps
Thanks, that explains so much (Newbie RZ500 guy here, helping a friend with there restomod)