Clutch push rod and seal

General forum on engines, transmissions, gearing and modifications to each

Moderator: rztom

Post Reply
Message
Author
thumper580
Posts: 60
Joined: Wed Jul 12, 2017 3:34 pm
Location: Virginia

Clutch push rod and seal

#1 Post by thumper580 » Thu Jul 27, 2017 12:47 pm

Couple of questions...
1. can I remove the clutch push rod from the left side (sprocket cover side) of the bike without anything unpleasant happening?
2. is that seal available or is there another seal number that will work?

Thanks all.

User avatar
Speed Freak
- - - - -
- - - - -
Posts: 930
Joined: Sun Oct 28, 2012 6:38 pm
Location: Voitsberg, Austria

Re: Clutch push rod and seal

#2 Post by Speed Freak » Thu Jul 27, 2017 3:29 pm

1) You can pull it out.
There is a steel ball on the other side, but I think it can`t go anywhere.
Need to draw the engine parts in CAD soon :smt005

2) Old number is 371-15389-00
It is superseded by 93109-08061
Means, if you order the old number, you will get the new part.
They fit from technical view, but it can happen that they look different.
In case of the seal I think there will be no difference ;)
My bikes:
RD500 YPVS 1GE
RD350 YPVS 31K 1985
Honda CBR 1000 RR SC57
Yamaha R1 RN04

thumper580
Posts: 60
Joined: Wed Jul 12, 2017 3:34 pm
Location: Virginia

Re: Clutch push rod and seal

#3 Post by thumper580 » Thu Jul 27, 2017 4:09 pm

Thanks.

Post Reply