Inlet rubbers
Moderator: rztom
Inlet rubbers
Anyone got these off EBay?? If so are they any good?
- jackson.40
- *****
- Posts: 2328
- Joined: Fri Dec 30, 2005 7:01 pm
- Location: Cambridge,UK
Re: Inlet rubbers
Here is the link to them.....................
https://www.ebay.co.uk/itm/Carburettor- ... SwlaVZk04V" onclick="window.open(this.href);return false;
https://www.ebay.co.uk/itm/Carburettor- ... SwlaVZk04V" onclick="window.open(this.href);return false;
-
- - - - - -
- Posts: 3241
- Joined: Sat Feb 04, 2012 7:36 am
Re: Inlet rubbers
Or here for much less $$ https://www.aliexpress.com/item/Carb-In ... autifyAB=0" onclick="window.open(this.href);return false;
Re: Inlet rubbers
That's good to know. Thanks for that [emoji106].silverstrom wrote:Or here for much less $$ https://www.aliexpress.com/item/Carb-In ... autifyAB=0" onclick="window.open(this.href);return false;
Sent from my HTC Desire 530 using Tapatalk
Current Bikes
1984 47X RD500LC, 2018 Triumph Speed Triple RS, 1999 Honda CB600F Hornet
Past Bikes Include
RD250LC, RD350YPVS LC2 Race Bike, RD350F2, 1976 CB400F
1984 47X RD500LC, 2018 Triumph Speed Triple RS, 1999 Honda CB600F Hornet
Past Bikes Include
RD250LC, RD350YPVS LC2 Race Bike, RD350F2, 1976 CB400F
Re: Inlet rubbers
I bought a set of those and I'm happy with them. Very nice. You can't use the original crossover tubes because they didn't mold in the groove for the bead on the tube but mine came with new tubes with no bead. They even have the correct spots molded in to position the carbs clamps.
RZ500
RZ350
SRX600
NT650 Hawk
VFR400R NC30
NS400R
CBR400RR
CBR250RR
DUC 916
Derbi GPR50 w/CR125 engine
RZ350
SRX600
NT650 Hawk
VFR400R NC30
NS400R
CBR400RR
CBR250RR
DUC 916
Derbi GPR50 w/CR125 engine