Koso RX1N on RG500

General forum on troubleshooting electrical problems and modifications to electrical systems

Moderator: rztom

Post Reply
Message
Author
roller
Posts: 3
Joined: Wed Nov 14, 2012 10:43 am

Koso RX1N on RG500

#1 Post by roller » Tue Jan 29, 2013 4:11 pm

[*]Hello,

Maybe I am on the wrong thread here, but here we go anyway :-)
I have problem getting the right RPM readings when connecting a KOSO rx1N on my RG500.
I tried alternative A. Wire direct to spark plug cable. No life.
I tried alternative B. Wire to white cable on CDI box. No life
I have NOT tried alternative C.I am not shure of the right cable on RG5.I think it is black/red but not shure.
When connecting Brown wire from KOSO to the White/blue original rev cable I got life. But I think there is to low RPM readings.
I used the KOSO manual settings. 2 stroke,4 pistongs and hi impulse.
I even tried 2 stroke,2 pistongs hi impuls and got better readings but it`s not feeling right.....
I tried to switch to lo impulse but no good.
Someone who knows the right settings and wiring?


//Uffe

Post Reply