Zeel Ignition Maps

General forum on troubleshooting electrical problems and modifications to electrical systems

Moderator: rztom

Post Reply
Message
Author
Edd
Posts: 79
Joined: Fri Jun 11, 2010 9:44 pm

Zeel Ignition Maps

#1 Post by Edd » Wed May 15, 2013 7:29 am

Hi Guys;

Borut has send me 4 diffrent maps. Two are standard 47x and 51g maps. The other two are for tuned engines. I only have jim lomas pipes on my bike does that qualify my bike as tuned? I also changed the jetting for the pipes as was suggested on the site pilots and mains. I am running standard lead replacement fuel 95 octane.

Edd

rubberfingers
- - - - -
- - - - -
Posts: 576
Joined: Sun Nov 22, 2009 8:21 am
Location: Midlands UK

Re: Zeel Ignition Maps

#2 Post by rubberfingers » Thu May 16, 2013 4:46 pm

Hi

I was only aware of different curves on the 47x and 1ge standard CDI's. I would try the 1ge map first (if you have it?).

The pickups were also different on the bikes to match the different CDI's

Andy
RD500
TZR250 2MA
TZR250 3MA
TDR250
YZF600R
DT125RE
XS750E
DTR125
FZ1

Edd
Posts: 79
Joined: Fri Jun 11, 2010 9:44 pm

Re: Zeel Ignition Maps

#3 Post by Edd » Thu May 23, 2013 6:27 am

Hi;

He gave me the two maps per cdi type, but when I downloaded the map on the cdi the timing was retarded compared to the maps he send me. I then advanced it to the standard cdi and the bike was a bit more crisp, although it was still low on power due to suspected carb issues.

Edd

Post Reply