New RZV replica main harness and connectors (group purchase)
Moderator: rztom
New RZV replica main harness and connectors (group purchase)
I'm organizing a group purchase for new RZV main harnesses and connector sets. The replica harness is very close in appearance to the OEM part. It has the provision for the RZV fuel level sender. The set of connectors are the component side connectors which are used to restore the "other side" of the connector.
This shop can also recreate RD/RZ spec harnesses but will need a sample harness to copy. The shop also can produce custom harness configurations on request.
The RZV harness currently comes in 3 configurations.
Type A - Identical to the OEM RZV harness.
Type B - RZV harness PLUS 1 ACC outlet which is located in the upper cowl area.
Type C - RZV harness but main fuse is changed to a blade-type fuse and relocated to the cowl area and all fuses will be blade-type fuses in a new fuse box which is provided.
Connector set (see my other post for the picture)
I'm planning to place the order on May 11th. If anyone is interested, please either post here or send me a PM.
Shayne
This shop can also recreate RD/RZ spec harnesses but will need a sample harness to copy. The shop also can produce custom harness configurations on request.
The RZV harness currently comes in 3 configurations.
Type A - Identical to the OEM RZV harness.
Type B - RZV harness PLUS 1 ACC outlet which is located in the upper cowl area.
Type C - RZV harness but main fuse is changed to a blade-type fuse and relocated to the cowl area and all fuses will be blade-type fuses in a new fuse box which is provided.
Connector set (see my other post for the picture)
I'm planning to place the order on May 11th. If anyone is interested, please either post here or send me a PM.
Shayne
Last edited by RZVTokyo on Fri Apr 22, 2016 7:56 am, edited 2 times in total.
Re: New RZV replica main harness and connectors (group purch
Will place the order tomorrow. So far, only one person is interested.
Re: New RZV replica main harness and connectors (group purch
Sorry about that, dude.
I'd like a harness, but it's too soon for me. I'm not sure how and where my electricals will be located once the OEM bodywork goes bye-bye.
I'd like a harness, but it's too soon for me. I'm not sure how and where my electricals will be located once the OEM bodywork goes bye-bye.
Re: New RZV replica main harness and connectors (group purch
Hi Pete,
No problem. Let me know when you need your harness. The shop can also custom build a harness if you provide a sample. The sample could be made from an old harness. It doesn't need to be a working sample.
I'm also planning to have the shop build a harness for my Costin YZR replica in the future.
No problem. Let me know when you need your harness. The shop can also custom build a harness if you provide a sample. The sample could be made from an old harness. It doesn't need to be a working sample.
I'm also planning to have the shop build a harness for my Costin YZR replica in the future.
Re: New RZV replica main harness and connectors (group purch
Hi Shayne,
Is it to late? I forgot all about your post, but would like two sets of connectors.
Thanks mate!
/Steen
Is it to late? I forgot all about your post, but would like two sets of connectors.
Thanks mate!
/Steen
If I had a signature, it would be good.
Re: New RZV replica main harness and connectors (group purch
Hi Steen,
The shop had only one set in stock. The Yamaha connectors are on back order. The shop will contact me when they receive more connectors.
Shayne
The shop had only one set in stock. The Yamaha connectors are on back order. The shop will contact me when they receive more connectors.
Shayne
Re: New RZV replica main harness and connectors (group purch
Hi Again,
That's ok. We will arrange payment etc. when they are in stock again, right?
/Steen
That's ok. We will arrange payment etc. when they are in stock again, right?
/Steen
If I had a signature, it would be good.
Re: New RZV replica main harness and connectors (group purch
The harnesses arrived yesterday. The quality of these harnesses is very good.
Re: New RZV replica main harness and connectors (group purch
Hi Shayne
I just received my wiring loom and connectors - I'm very pleased with the quality of them.
It would be nice to get a RZ/ RD500 loom done at some point as well.
Let's hope there is more interest in the wiring looms than you've seen so far. Having spent a lot of money restoring two bikes I wasn't happy to put old wiring back on them. I managed to purchase a new loom from Yamaha UK about a year ago - sadly I discovered that they have gone NLA now so it was nice to see this quality after-market loom available.
Many thanks.
Cheers
Paul
I just received my wiring loom and connectors - I'm very pleased with the quality of them.
It would be nice to get a RZ/ RD500 loom done at some point as well.
Let's hope there is more interest in the wiring looms than you've seen so far. Having spent a lot of money restoring two bikes I wasn't happy to put old wiring back on them. I managed to purchase a new loom from Yamaha UK about a year ago - sadly I discovered that they have gone NLA now so it was nice to see this quality after-market loom available.
Many thanks.
Cheers
Paul
Re: New RZV replica main harness and connectors (group purch
Hi Paul,
I'm also very happy with the build quality.
If someone would be willing to let the shop borrow an RZ/RD harness, they would be able to duplicate it as well. The shop only has the schematics for the RZV harness.
Still waiting on the connectors...
I'm also very happy with the build quality.
If someone would be willing to let the shop borrow an RZ/RD harness, they would be able to duplicate it as well. The shop only has the schematics for the RZV harness.
Still waiting on the connectors...
Re: New RZV replica main harness and connectors (group purch
Hi Shayne,RZVTokyo wrote:Hi Paul,
I'm also very happy with the build quality.
If someone would be willing to let the shop borrow an RZ/RD harness, they would be able to duplicate it as well. The shop only has the schematics for the RZV harness.
Still waiting on the connectors...
I've got a new RD500 harness and a used RD500 harness which is dirty and oily. Would they need the new harness to work with and can I confirm that they wouldn't need to cut into it to check the internal wiring out ? - I assume an oily old harness wouldn't be nice to work on ?
Cheers
Paul
Re: New RZV replica main harness and connectors (group purch
Some people seem to be interested in the replacement RZV harnesses. I'm planning another group purchase.
Here's what's available:
Type A - Identical to the OEM RZV harness.
Type B - RZV harness PLUS 1 ACC outlet which is located in the upper cowl area.
Type C - RZV harness but main fuse is changed to a blade-type fuse and relocated to the cowl area and all fuses will be blade-type fuses in a new fuse box which is provided.
Connector set (see my other post for the picture)
I'll go to the shop to place the order on March 16th.
Shayne
Here's what's available:
Type A - Identical to the OEM RZV harness.
Type B - RZV harness PLUS 1 ACC outlet which is located in the upper cowl area.
Type C - RZV harness but main fuse is changed to a blade-type fuse and relocated to the cowl area and all fuses will be blade-type fuses in a new fuse box which is provided.
Connector set (see my other post for the picture)
I'll go to the shop to place the order on March 16th.
Shayne
Last edited by RZVTokyo on Fri Apr 22, 2016 7:58 am, edited 1 time in total.
Re: New RZV replica main harness and connectors (group purch
Any progress on a regular RZ harness? I'd be in for one
Re: New RZV replica main harness and connectors (group purch
My project was extended so I'll now be back in Tokyo by March 23rd. If anyone is interested in purchasing a harness, please send me a PM by March 21st. I'm planning to visit the shop on the 25th. to place the order.
Shayne
Shayne
Re: New RZV replica main harness and connectors (group purch
No problem. Did you get my pictures?RZVTokyo wrote:... I'm planning to visit the shop on the 25th. to place the order...
/Steen
If I had a signature, it would be good.