Track bike progress

Got a customizing or restoration project? Post your progress pictures and updates here

Moderator: rztom

Message
Author
User avatar
Smoker
- - - - -
- - - - -
Posts: 1757
Joined: Sat Jun 14, 2008 7:16 am

Re: Track bike progress

#121 Post by Smoker » Sun Aug 27, 2017 1:03 pm

wolfgangh wrote:Thanks Smoker, here it is:

Picture shows the last 3 dyno runs - the green one with less peak power was with PV fully open earlier,

Image

User avatar
wolfgangh
- - - - -
- - - - -
Posts: 1003
Joined: Thu Nov 17, 2005 5:37 am
Location: Vienna, Austria
Contact:

Re: Track bike progress

#122 Post by wolfgangh » Mon Aug 28, 2017 4:27 pm

Enjoy a video from the dyno run here - turn on the volume!

https://youtu.be/MNivPHVNI_k

Wolfgang

RC45
- - - - -
- - - - -
Posts: 1713
Joined: Fri Aug 19, 2011 5:18 am
Location: Houston, Texas.

Re: Track bike progress

#123 Post by RC45 » Tue Sep 05, 2017 7:03 am

wolfgangh wrote:I will aim to stay below 680 deg C at WOT - today we had max. 580 on the dyno runs
680*C seems quite low, I understand the 250 folks run in the 900 to 1100 range. Is there any more power if you lean it out to 800*? What is the optimum EGT for the RZ500?
CBR1000RR SP2 HRC WSBK
TZ500V/OW53 Track bike
YZR500 OW81 Clone
OW69 Daytona 200 Replica - 784cc Monster
NS400 Track Bike
RS250R NF5
TZ250T 2KM
TZ250B 3YL
TZR250 3MA Track Bike
427ci C5 Z07

motosapien
Posts: 126
Joined: Fri Feb 26, 2016 12:55 pm
Location: Issaquah WA

Re: Track bike progress

#124 Post by motosapien » Tue Sep 12, 2017 1:28 am

RC45 wrote:
wolfgangh wrote:I will aim to stay below 680 deg C at WOT - today we had max. 580 on the dyno runs
680*C seems quite low, I understand the 250 folks run in the 900 to 1100 range. Is there any more power if you lean it out to 800*? What is the optimum EGT for the RZ500?
what is the melting temp of aluminum?

RC45
- - - - -
- - - - -
Posts: 1713
Joined: Fri Aug 19, 2011 5:18 am
Location: Houston, Texas.

Re: Track bike progress

#125 Post by RC45 » Tue Sep 12, 2017 4:45 am

motosapien wrote:
RC45 wrote:
wolfgangh wrote:I will aim to stay below 680 deg C at WOT - today we had max. 580 on the dyno runs
680*C seems quite low, I understand the 250 folks run in the 900 to 1100 range. Is there any more power if you lean it out to 800*? What is the optimum EGT for the RZ500?
what is the melting temp of aluminum?
Beats me.. I just know I see EGT gauges with temp scales ranging from 350* to 1700* - must be *F then :)
CBR1000RR SP2 HRC WSBK
TZ500V/OW53 Track bike
YZR500 OW81 Clone
OW69 Daytona 200 Replica - 784cc Monster
NS400 Track Bike
RS250R NF5
TZ250T 2KM
TZ250B 3YL
TZR250 3MA Track Bike
427ci C5 Z07

User avatar
Smoker
- - - - -
- - - - -
Posts: 1757
Joined: Sat Jun 14, 2008 7:16 am

Re: Track bike progress

#126 Post by Smoker » Tue Sep 12, 2017 4:58 am

motosapien wrote: what is the melting temp of aluminum?
933.47 K ​
660.32 °C
1220.58 °F

RC45
- - - - -
- - - - -
Posts: 1713
Joined: Fri Aug 19, 2011 5:18 am
Location: Houston, Texas.

Re: Track bike progress

#127 Post by RC45 » Tue Sep 12, 2017 7:13 am

Smoker wrote:
motosapien wrote: what is the melting temp of aluminum?
933.47 K ​
660.32 °C
1220.58 °F
I guess that answers the question about *F vs *C LOL
CBR1000RR SP2 HRC WSBK
TZ500V/OW53 Track bike
YZR500 OW81 Clone
OW69 Daytona 200 Replica - 784cc Monster
NS400 Track Bike
RS250R NF5
TZ250T 2KM
TZ250B 3YL
TZR250 3MA Track Bike
427ci C5 Z07

Andy500R
Posts: 173
Joined: Thu Jun 27, 2013 5:14 pm

Re: Track bike progress

#128 Post by Andy500R » Thu Oct 26, 2017 6:59 pm

Hi Wolfgangh did you make any spare
Marlboro sticker kits or know of any
good supplier , thanks .also did you use
any fastners at the front of the seat unit ??
Your bike looks amazing ??Andy

Post Reply