New addition to the Garage...

[hyperduc]

I've been looking for an RZ500 for a few years and ran across this one almost 2 months ago. Its taken awhile to get it here (Ohio) from Medford Oregon but it finally showed up last Monday. Engine/suspension all stock(save for the Lomas chambers). AirTech fairings, R6 front brakes. I've only had time to take it for 1 (quite illegal) ride and everything works as it should on a 31 year old 2 smoke. Needs a thorough going thru this winter. I was looking for a rider that wouldn't break the bank.... I believe I've found one

[podman]

Loving the JPS look! Nice buy mate..

[RC45]

Very nice.

[hyperduc]

Thanks guys. Looking forward to getting legal and giving it a proper flogging....

[motosapien]

you beat me on this! nice buy $7500?

[hyperduc]

LOL! Thanks.
Sorry to have rained on your parade. I know the feeling well. For the past 2 or so years I've been a day late to the dance when chasing after one of these.
Good luck with your search.

[Beas]

Where do you live in eastern Ohio? I live in Hudson and have a RZ500.
Tom

[hyperduc]

Hi Tom. I live near Bellaire OH, so not too far from you (130-ish miles). Definitely need to get together sometime so I can pick your brain
About the RZ.

Terry

[LawBrkrRcn]

Hey Hyperduc. If possible could you take some good detailed pictures of how your tail section and seat are mounted as I have the same tail section that I am getting ready to put on my bike and would like to see how yours is mounted. Funny as I saw this bike back in 2010 at Barber for the last Gamma gathering there. I took a couple of pictures, but the owner wasn't around to talk to or get detailed pictures. Appreciate any pictures you could send me. Direct E:Mail is lawbrkrrcn@sbcglobal.net. L8R Mark

[hyperduc]

PM sent...

[hyperduc]

I decided to raise the rear ride height via shock link modification. I contacted Wolfghang, but unfortunately he no longer does the mod. I took a flyer and contacted Bill Wilson: https://wilsonperformance.net/" onclick="window.open(this.href);return false; He offered to get hold of Wolfghang to see if he'd share his modification information and if he would he do the mod for me.

A big thanks to Wofghang for sharing his modification information with Bill, and to Bill for the excellent job done modifying the links. Pics below!

https://imgur.com/VEBG9kr" onclick="window.open(this.href);return false;

https://imgur.com/B7DKs61" onclick="window.open(this.href);return false;

https://imgur.com/Li1i4AH" onclick="window.open(this.href);return false;

https://imgur.com/BEI0fKs" onclick="window.open(this.href);return false;

[giron]

have you contacted RGVSteve? he did mine

[hyperduc]

have you contacted RGVSteve? he did mine

I sent him a PM. He never responded.

[wolfgangh]

I decided to raise the rear ride height via shock link modification. I contacted Wolfghang, but unfortunately he no longer does the mod. I took a flyer and contacted Bill Wilson: https://wilsonperformance.net/" onclick="window.open(this.href);return false; He offered to get hold of Wolfghang to see if he'd share his modification information and if he would he do the mod for me.

A big thanks to Wofghang for sharing his modification information with Bill, and to Bill for the excellent job done modifying the links. Pics below!

https://imgur.com/VEBG9kr" onclick="window.open(this.href);return false;

https://imgur.com/B7DKs61" onclick="window.open(this.href);return false;

https://imgur.com/Li1i4AH" onclick="window.open(this.href);return false;

https://imgur.com/BEI0fKs" onclick="window.open(this.href);return false;

You are wellcome!

[hyperduc]

have you contacted RGVSteve? he did mine

I sent him a PM. He never responded.

Steve, Thanks for getting in touch with me...