RZV500R / YZR500 OWD1 Project
Moderator: rztom
RZV500R / YZR500 OWD1 Project
Fairing moulded and made by King Carbon from a 1991 YZR500 that I adapted for the RZV500R / RD500 / RZ500 - it can take the original airboxes and radiator , although this version has a 34mm carb, air filter and throttle cable kit by Bill Wilson and a larger radiator for the RZ/RZV/RD500 from RG500.com.
Swingarm and wheels are Yamaha R6 2CO, Brembo brakes and Ohlins forks and fittings were done by NK Racing. The seat unit needed a modified sub-frame which was done by GIA of Nottingham. Exhausts are Jim Lomas (JL) with NK Racing silencers
Engine was rebuilt by SEP of Kegworth and put together by myself, and will hopefully be tuned by Daz , which will mean it coming apart again
Rear set brackets are by NK Racing and the pegs and levers are Harris Performance with a Brembo master cylinder with integral reservoir and internal spring.
Still lots of work to do but slowly getting there.
I'm going to have some frame bracing done at the back of the frame and at the headstock. M.E. Motorcycles of Burton will be doing all the finishing touches like the frame bracing, wiring loom, Zeeltronic CDI/YPVS, chain, brake lines, etc, etc over the winter.
It doesn't begin to compare with the YZR replicas that I've seen recently on this forum but fingers crossed it will be a nice bike when I've finished it.
Swingarm and wheels are Yamaha R6 2CO, Brembo brakes and Ohlins forks and fittings were done by NK Racing. The seat unit needed a modified sub-frame which was done by GIA of Nottingham. Exhausts are Jim Lomas (JL) with NK Racing silencers
Engine was rebuilt by SEP of Kegworth and put together by myself, and will hopefully be tuned by Daz , which will mean it coming apart again
Rear set brackets are by NK Racing and the pegs and levers are Harris Performance with a Brembo master cylinder with integral reservoir and internal spring.
Still lots of work to do but slowly getting there.
I'm going to have some frame bracing done at the back of the frame and at the headstock. M.E. Motorcycles of Burton will be doing all the finishing touches like the frame bracing, wiring loom, Zeeltronic CDI/YPVS, chain, brake lines, etc, etc over the winter.
It doesn't begin to compare with the YZR replicas that I've seen recently on this forum but fingers crossed it will be a nice bike when I've finished it.
Re: RZV500R / YZR500 OWD1 Project
Very nice Paul, The lines are great, everything fits really nice, Looking forward to seeing it finished..
1985 RZv500
1984 RZ500 Hybrid
1986 RG500 Walter Wolf
1986 RG500 Skoal Bandit
1984 RZ350
1984 RZ350 Hybrid
1981 RD350LC
1981 RD350LC Hybrid
2009 CR500AF Supermoto 250X
2007 CR500AF 250X
1988 YSR50 (2)
1989 VFR750R RC30
1984 GPZ750 Turbo
1984 RZ500 Hybrid
1986 RG500 Walter Wolf
1986 RG500 Skoal Bandit
1984 RZ350
1984 RZ350 Hybrid
1981 RD350LC
1981 RD350LC Hybrid
2009 CR500AF Supermoto 250X
2007 CR500AF 250X
1988 YSR50 (2)
1989 VFR750R RC30
1984 GPZ750 Turbo
-
- - - - - -
- Posts: 609
- Joined: Thu May 24, 2018 5:22 pm
Re: RZV500R / YZR500 OWD1 Project
yes, that is really nice
-
- - - - - -
- Posts: 3241
- Joined: Sat Feb 04, 2012 7:36 am
Re: RZV500R / YZR500 OWD1 Project
It's a nice bike now. You've done a terrific job. Looks brilliant.rd84 wrote:fingers crossed it will be a nice bike when I've finished it.
- jackson.40
- *****
- Posts: 2328
- Joined: Fri Dec 30, 2005 7:01 pm
- Location: Cambridge,UK
Re: RZV500R / YZR500 OWD1 Project
I love it Paul, class job
Re: RZV500R / YZR500 OWD1 Project
Beautiful. You're going to love the Ohlins/Brembo ride! Those look like the same Brembo billet axial 30/34 GP calipers I am using on my RZV build. I have one of Wyn's tail sections but can't seem to find a front fairing. Will King Carbon be selling this RZV version fairing?
1985 RZ500
1986 RG500
1986 RG500 C
1992 RGV500 WW ATR
1992 RGV500 LS
1985 NS500 Spencer p
1989 TZR500 Biaggi p
1984 RZV500 Rainey p
1994 NSR250sp R
1983 NS250 p
1987 RG250 WW p
1983 RG250 p
1988 YSR50 p
1986 RG500
1986 RG500 C
1992 RGV500 WW ATR
1992 RGV500 LS
1985 NS500 Spencer p
1989 TZR500 Biaggi p
1984 RZV500 Rainey p
1994 NSR250sp R
1983 NS250 p
1987 RG250 WW p
1983 RG250 p
1988 YSR50 p
Re: RZV500R / YZR500 OWD1 Project
Really looking forward to getting this bike running !ns86 wrote:Beautiful. You're going to love the Ohlins/Brembo ride! Those look like the same Brembo billet axial 30/34 GP calipers I am using on my RZV build. I have one of Wyn's tail sections but can't seem to find a front fairing. Will King Carbon be selling this RZV version fairing?
They're about to send the moulds back to me - but if you ring and ask they will make you a set.
Cheers
paul
Re: RZV500R / YZR500 OWD1 Project
Thanks for the nice comments everyone
I'll try and keep doing some update photos to show progress.
Cheers
Paul
I'll try and keep doing some update photos to show progress.
Cheers
Paul
Re: RZV500R / YZR500 OWD1 Project
What swing arm is that
Re: RZV500R / YZR500 OWD1 Project
Hi,cobraace wrote:What swing arm is that
Its a Yamaha R6 2CO modified by NK Racing.
Cheers
Paul
Re: RZV500R / YZR500 OWD1 Project
Paul
Did you paint the swingarm or just natural alloy?
Thanks
Ade
Did you paint the swingarm or just natural alloy?
Thanks
Ade
Re: RZV500R / YZR500 OWD1 Project
Nice looking bike.
CBR1000RR SP2 HRC WSBK
TZ500V/OW53 Track bike
YZR500 OW81 Clone
OW69 Daytona 200 Replica - 784cc Monster
NS400 Track Bike
RS250R NF5
TZ250T 2KM
TZ250B 3YL
TZR250 3MA Track Bike
427ci C5 Z07
TZ500V/OW53 Track bike
YZR500 OW81 Clone
OW69 Daytona 200 Replica - 784cc Monster
NS400 Track Bike
RS250R NF5
TZ250T 2KM
TZ250B 3YL
TZR250 3MA Track Bike
427ci C5 Z07
-
- Posts: 92
- Joined: Thu Jul 21, 2011 9:02 pm
- Location: Outside Carrollton, Georgia
Re: RZV500R / YZR500 OWD1 Project
I really like the look of your bike as well.. Frank
1973 Yamaha AT3 e-start, 1977 Yamaha TY250D, 1985 RZ500, 1987 Suzuki RG500CH, 1991/2014 TZR450F Yamaha, 1991TZ250B Yamaha, 1991 Yamaha TZR250R, 2005 Scorpa SY250R, 2017 Ducati SuperSport939S (for the runners)
Re: RZV500R / YZR500 OWD1 Project
Hi Ade,Ade SYM wrote:Paul
Did you paint the swingarm or just natural alloy?
Thanks
Ade
It’s a natural brushed alloy finish - I had it bead blasted then lots of hours spent with scotchbrite.
Cheers
Paul