Check valves
Moderator: rztom
Check valves
Hi guys just wondering when installing in line check valves can you keep the original valves in or do they need to be removed.
-
- Posts: 336
- Joined: Wed Jul 03, 2019 1:46 pm
Re: Check valves
Yes you can. I did it on both bikes. The hard part was i could not locate a barbed fitting with the proper threads to go in the pump. My back has been used on the track for a lot of miles and no issues. Are you installing under the crank seal cover?
Re: Check valves
Hi thanks for the reply I will be installing the plastic ones in to theblack lines just after the original check valves. So question is do I need to remove the original check valves or leave them and just cut the hose lines and install the new check valves.
Re: Check valves
Just cut the lines and fit them. Leave the oem check valves in place.
1985 RZv500
1984 RZ500 Hybrid
1986 RG500 Walter Wolf
1986 RG500 Skoal Bandit
1984 RZ350
1984 RZ350 Hybrid
1981 RD350LC
1981 RD350LC Hybrid
2009 CR500AF Supermoto 250X
2007 CR500AF 250X
1988 YSR50 (2)
1989 VFR750R RC30
1984 GPZ750 Turbo
1984 RZ500 Hybrid
1986 RG500 Walter Wolf
1986 RG500 Skoal Bandit
1984 RZ350
1984 RZ350 Hybrid
1981 RD350LC
1981 RD350LC Hybrid
2009 CR500AF Supermoto 250X
2007 CR500AF 250X
1988 YSR50 (2)
1989 VFR750R RC30
1984 GPZ750 Turbo
-
- Posts: 43
- Joined: Fri Oct 29, 2021 4:45 am
Re: Check valves
Been told these fit the pump so you can remove the OEM check valves
https://www.advancedfluidsolutions.co.u ... KmS9mGOVl4
https://www.advancedfluidsolutions.co.u ... KmS9mGOVl4