OW69 Fuel Tank question - Bodywork Molds?
Moderator: rztom
Hi Peddrotzr,peddrotzr wrote:Hi mpazo,
I will be making the molds for the OW69 fairings, but this will be a little later this year.
I will keep you informed as to progress.
Best regards
Johnny C.
How is it going?
I´m still interested in this bodywork, so please let me know once there are any news.
Thanks!
Hi mpazompazo wrote:Hi Peddrotzr,peddrotzr wrote:Hi mpazo,
I will be making the molds for the OW69 fairings, but this will be a little later this year.
I will keep you informed as to progress.
Best regards
Johnny C.
How is it going?
I´m still interested in this bodywork, so please let me know once there are any news.
Thanks!
Thank you for your interest, I will still be making the molds for this body work, however I am a bit behind on my work schedule hence the delay, I expect to have the molds made by Christmas.
I will post more information when I have made them.
Sorry for the delay.
Best regards
Johnny C.
-
- Posts: 1
- Joined: Sun Nov 04, 2012 4:43 pm
- Location: south africa
[/quote]ali fab motorcycle eng wrote:HI there, new to this forum, would like to know if you have completed the moulds for the 1991 yzr OWD3 yet, and the cost please.
cheers Mark ali fab.[/list][/code]
Hi Mark,
The molds for the OWD3 have not been made as yet, as I have been finishing off some other fairing kits first, I should make a start on them in the next few weeks.
As for cost, sorry but I will have more of an idea once the molds are finished.
I will contact you then if that's OK ?
Thanks for your interest.
Best regards
Johnny C.
Re: OW69 Fuel Tank question - Bodywork Molds?
Hi Pedrotzrr,
Any news on the fairings?
Thanks!
Any news on the fairings?
Thanks!
Re: OW69 Fuel Tank question - Bodywork Molds?
Very sorry, but I am away working on an Aprilia RS485 & and 2 x RG500's in Australia at the moment, I will be back in the UK 1st week of March, I will update you then if that's OK?mpazo wrote:Hi Pedrotzrr,
Any news on the fairings?
Thanks!
Best regards
Johnny C.
Re: OW69 Fuel Tank question - Bodywork Molds?
Hi again!peddrotzr wrote:Very sorry, but I am away working on an Aprilia RS485 & and 2 x RG500's in Australia at the moment, I will be back in the UK 1st week of March, I will update you then if that's OK?mpazo wrote:Hi Pedrotzrr,
Any news on the fairings?
Thanks!
Best regards
Johnny C.
Please let me know once you've any news.
Best regards.
Re: OW69 Fuel Tank question - Bodywork Molds?
Sorry chaps, not been on here for a while.
Due to ill health I am not in a possition at present to make molds or parts,
hopefully this will improve in a few months.
Very sorry for the delay in coming here to let you know.
Best regards
Johnny C.
Due to ill health I am not in a possition at present to make molds or parts,
hopefully this will improve in a few months.
Very sorry for the delay in coming here to let you know.
Best regards
Johnny C.
Re: OW69 Fuel Tank question - Bodywork Molds?
Get well soon Johnny.
For those interested there is a good article in the latest Performance Bikes magazine which shows the Aprilia '500' that Johnny was working on in Australia.
Well worth a look - a beautiful machine.
Cheers
Paul
For those interested there is a good article in the latest Performance Bikes magazine which shows the Aprilia '500' that Johnny was working on in Australia.
Well worth a look - a beautiful machine.
Cheers
Paul
- Ronnie
- - - - - -
- Posts: 1574
- Joined: Wed Nov 16, 2005 7:40 pm
- Location: Newcastle upon Tyne, England
Re: OW69 Fuel Tank question - Bodywork Molds?
Hope you're well soon Johnny.
- jackson.40
- *****
- Posts: 2328
- Joined: Fri Dec 30, 2005 7:01 pm
- Location: Cambridge,UK
Re: OW69 Fuel Tank question - Bodywork Molds?
If Johnny is involved in a bike it can only be beautiful
Sorry to hear you are unwell,get well soon.
Sorry to hear you are unwell,get well soon.
Re: OW69 Fuel Tank question - Bodywork Molds?
Hope you get well soon.peddrotzr wrote:Sorry chaps, not been on here for a while.
Due to ill health I am not in a possition at present to make molds or parts,
hopefully this will improve in a few months.
Very sorry for the delay in coming here to let you know.
Best regards
Johnny C.
You health is more important than any moulds.
Re: OW69 Fuel Tank question - Bodywork Molds?
Hi,
Sorry just seen the rest of the thread, get well soon.
Thanks
Sorry just seen the rest of the thread, get well soon.
Thanks
-
- Posts: 15
- Joined: Thu Nov 17, 2005 12:23 pm
Re: OW69 Fuel Tank question - Bodywork Molds?
Johnny, it's been quite a while. Are you feeling better?