Hi, just installed Koso Rx2 after a rebuild of the bike. The Koso works fine and so does the bike but I can not turn off the engine with the key ?? I have to kill it with engine stop. Any ideas what went wrong? I hooked up the main red and brown from the ignition.
/ Stinke
Koso and ignition key
Moderator: rztom
Koso and ignition key
2 x rd 500 -84
Rd 350 ypvs -84
Rd 250 -74
Kh400, t20
The best of swedish metal: https://youtu.be/gkBt7yLXyDk" onclick="window.open(this.href);return false;
Rd 350 ypvs -84
Rd 250 -74
Kh400, t20
The best of swedish metal: https://youtu.be/gkBt7yLXyDk" onclick="window.open(this.href);return false;
Re: Koso and ignition key
Usually the Koso does not have to do anything with the kill switch function so my guess is that during working you disconnected a plug. I'd double check that.
The ignition switch grounds the red/white wire on the CDI.
If you have a look here:
http://home.kabelfoon.nl/~pkorpel/RD500 ... iagram.jpg" onclick="window.open(this.href);return false;
my suspect goes to the single bullet connector at the black/white cable on the switch.
If you use a Zeeltronic or Ignitech you can interrupt ignition either by grounding a pin or simply shutting off the 12V supply.
The ignition switch grounds the red/white wire on the CDI.
If you have a look here:
http://home.kabelfoon.nl/~pkorpel/RD500 ... iagram.jpg" onclick="window.open(this.href);return false;
my suspect goes to the single bullet connector at the black/white cable on the switch.
If you use a Zeeltronic or Ignitech you can interrupt ignition either by grounding a pin or simply shutting off the 12V supply.
Bye
Martin
Martin
Re: Koso and ignition key
Sorry, I do not have an answer for you but I can offer this.
I have installed the Koso and the key switch works as it should. So it can be done.
Hopefully what MK wrote will help you out.
Beyond that you will just need to trace wires. If everything else is working it seems like it will be something simple.
Did it work before the Koso?
I have installed the Koso and the key switch works as it should. So it can be done.
Hopefully what MK wrote will help you out.
Beyond that you will just need to trace wires. If everything else is working it seems like it will be something simple.
Did it work before the Koso?
Ken's Garage YouTube Channel
https://www.youtube.com/c/KensGarage1
1985 RZ500 (R6 suspension & body work)
https://www.youtube.com/c/KensGarage1
1985 RZ500 (R6 suspension & body work)