Vendors can post special deals in here - Please, VENDORS ONLY
Moderator: rztom
-
Vin
- - - - - -
![- - - - - - - - - -](./images/ranks/contributor_grey.gif)
- Posts: 925
- Joined: Sun Sep 07, 2008 1:16 pm
- Location: Cheltenham, UK
-
Contact:
#46
Post
by Vin » Wed Aug 10, 2016 2:34 pm
silverstrom wrote:Carpal tunnel Vin?
Yes mate getting both done at the same time to minimise time off work, will be interesting with both hands wrapped up
Okay then guy's I will see what I can do
![:smt023](./images/smilies/023.gif)
-
silverstrom
- - - - - -
![- - - - - - - - - -](./images/ranks/contributor_grey.gif)
- Posts: 3241
- Joined: Sat Feb 04, 2012 7:36 am
#47
Post
by silverstrom » Thu Oct 13, 2016 4:26 pm
Vin wrote:I will gather some info and let you guy's know, however I'm having an op on both hands Friday so will be limited to what I can do unless I get chance before?
Are we still pursuing this Vin, when time allows?
John
-
Vin
- - - - - -
![- - - - - - - - - -](./images/ranks/contributor_grey.gif)
- Posts: 925
- Joined: Sun Sep 07, 2008 1:16 pm
- Location: Cheltenham, UK
-
Contact:
#48
Post
by Vin » Fri Oct 14, 2016 2:25 am
Ooops! sorry guy's I cleanly forgot, I will make some phone call's this weekend.
-
FlyingBoat
- Posts: 82
- Joined: Sat Nov 09, 2019 6:17 pm
- Location: Florida USA
-
Contact:
#49
Post
by FlyingBoat » Wed Dec 04, 2019 7:00 pm
If you can live without your seat a couple weeks I can make molds, I’ve made many for aircraft parts and limousine body panels, so motorcycle is much easier and a lot less material. For molds it’s ok to brush on gel coat but when laminating new parts inside the finished mold I always spray the gel coat, makes for a better layup with uniform thickness overall, I like to add a strip of glass some extra all the edges so not as fragile in practical use also. Logistics are I’m in Florida USA, perfect weather for such things with plenty of UV to assist with curing but probably far from local to most on this forum I’m guessing. Never hurts to offer though
1985 RZ500S Sold
1985 52X/RZV Project
-
JonW
- Posts: 385
- Joined: Sun Nov 11, 2018 11:40 pm
- Location: Sydney, Australia
-
Contact:
#50
Post
by JonW » Wed Dec 04, 2019 11:05 pm
Vin, Did you ever make any more of these? Im interested if you have any knocking about at home mate.
-
Vin
- - - - - -
![- - - - - - - - - -](./images/ranks/contributor_grey.gif)
- Posts: 925
- Joined: Sun Sep 07, 2008 1:16 pm
- Location: Cheltenham, UK
-
Contact:
#51
Post
by Vin » Thu Dec 05, 2019 6:23 pm
JonW wrote:Vin, Did you ever make any more of these? Im interested if you have any knocking about at home mate.
No mate sorry, Dirk (cascade500) is interested in a unit too and was contemplating buying the mould from me but just haven't had the time to find out what the postage would be.... Sorry Dirk. Maybe you and him could discuss and come to an arrangement? If interested that is?
Sent from my FIG-LX1 using Tapatalk
-
JonW
- Posts: 385
- Joined: Sun Nov 11, 2018 11:40 pm
- Location: Sydney, Australia
-
Contact:
#52
Post
by JonW » Thu Dec 05, 2019 6:27 pm
Vin wrote: ↑Thu Dec 05, 2019 6:23 pm
JonW wrote:Vin, Did you ever make any more of these? Im interested if you have any knocking about at home mate.
No mate sorry, Dirk (cascade500) is interested in a unit too and was contemplating buying the mould from me but just haven't had the time to find out what the postage would be.... Sorry Dirk. Maybe you and him could discuss and come to an arrangement? If interested that is?
Sent from my FIG-LX1 using Tapatalk
No worries, Cheers for the fast reply.
-
Vin
- - - - - -
![- - - - - - - - - -](./images/ranks/contributor_grey.gif)
- Posts: 925
- Joined: Sun Sep 07, 2008 1:16 pm
- Location: Cheltenham, UK
-
Contact:
#53
Post
by Vin » Wed Jan 15, 2020 9:32 am
I have had a few more inquiries regarding making more seat units so again depending on numbers I can get new quotes.
I may even offer for sale the actual mould if anyone is interested (cascade500 hasn't come back to me) £150 plus postage (mould is pretty robust so postage may be high if sending abroad)
-
Cascade500
- Posts: 55
- Joined: Thu Nov 17, 2005 12:42 am
- Location: Portland, Oregon
-
Contact:
#54
Post
by Cascade500 » Mon Mar 01, 2021 3:04 am
Hi Vin,
My apologies, this completely fell off my radar. I’m still interested, either in a seat unit or the mold. Can’t believe how time flys.
Cheers,
Dirk
-
Paul Waterloo
- Posts: 32
- Joined: Mon Jun 15, 2020 11:44 am
- Location: Chicago, IL USA
#55
Post
by Paul Waterloo » Wed Mar 03, 2021 2:59 pm
I would be interested in one.
1986 RZ500S (Number 3 of 150)
1993 BMW K1100RT
2003 BMW K1200GT
-
Vin
- - - - - -
![- - - - - - - - - -](./images/ranks/contributor_grey.gif)
- Posts: 925
- Joined: Sun Sep 07, 2008 1:16 pm
- Location: Cheltenham, UK
-
Contact:
#56
Post
by Vin » Fri Mar 05, 2021 3:08 pm
Hi guys,
I would rather sell on the mould as it is just collecting dust here but it is a very robust unit and weighs a bit so postage to the states won't be cheap. However the potential return will pay for itself as
l guess you may get more interest your end of the pond?
I would take £150 plus postage if anyone is interested?
I will get it weighed and an approx postage cost if anyone is seriously interested?
Regards Vin