ex tz350-750-rgb500-rider

Got a customizing or restoration project? Post your progress pictures and updates here

Moderator: rztom

Message
Author
Vin
- - - - -
- - - - -
Posts: 925
Joined: Sun Sep 07, 2008 1:16 pm
Location: Cheltenham, UK
Contact:

Re: ex tz350-750-rgb500-rider

#31 Post by Vin » Thu Aug 02, 2018 5:58 am

Hi Steve, Zeel has an option to have cdi and pv controller in one

http://www.zeeltronic.com/page/pcdi-24v.php" onclick="window.open(this.href);return false;

You will need a handheld programer

http://www.zeeltronic.com/page/programmer.php" onclick="window.open(this.href);return false;

or what I prefer is the pc link cable for a laptop

User avatar
pstamper
- - - - -
- - - - -
Posts: 1743
Joined: Fri May 09, 2008 8:56 pm
Location: Houston, Texas

Re: ex tz350-750-rgb500-rider

#32 Post by pstamper » Thu Aug 02, 2018 9:29 am

My controller was an older version with two separate black boxes. Borut was very helpful with wiring info and his site is good. I had issue getting tach to work. Finally went to one of the coil feeds an all good.

User avatar
Ax-Racing
Posts: 277
Joined: Sat Oct 24, 2009 5:11 am
Location: Modena (ITALY)

Re: ex tz350-750-rgb500-rider

#33 Post by Ax-Racing » Thu Aug 02, 2018 9:40 am

howie43 wrote:sorry not been on site much wife had a stroke ive been collecting parts to start build been looking at ax racing pics yzr replica fancy doing similar modifying top case to fitt carbs inline in v unshure wat carbs to use (any suggestions) thinking of making frame from scratch using aprilia factory swinging arm with different blocks on end when i can figure out machine also cnc clucht cover out billet for dry clucht make our own billet heads its going to take a month or so to get head round cnc to do these parts i will post pics when done and also intend making aviable to club our main problem is finding drawings or models for 3d if any one can help or advie with this side it be much appreciated

thanks for citation
in my italian forum you can see all machinigh on cases and building of new mainfold houses
hope it can helps

i will follow your progress
Alex

howie43
Posts: 45
Joined: Sun Apr 22, 2018 12:28 pm
Location: chester-england-uk

Re: ex tz350-750-rgb500-rider

#34 Post by howie43 » Fri Aug 03, 2018 1:38 am

thanks for reply's reference zee i purchased all in 1 cdi got it right
ax-seen your work excellent .i am struggling with making drawings on cad at moment learning do you have any drawings that i could use has a base drawing..in exchange im sure when cnc up and running we can do something for you hoping to cnc clutch cover dry clutch wit and with out kick start
king regards everyone steve

howie43
Posts: 45
Joined: Sun Apr 22, 2018 12:28 pm
Location: chester-england-uk

Re: ex tz350-750-rgb500-rider

#35 Post by howie43 » Thu Aug 09, 2018 2:04 pm

ign-carbs kienin air strike 38mm-brembo calipers arrived .waiting for ignition .need to sort reed blocks next possible v force any suggestions -cranks from america-dtr170 kit -suter clutch then ready to do engine build.done some research on frame possible going to build my own chassis using maxton shock and linkage by maxton-making former's for frame-i will be doing 2 off everything on this build so will be able to build 2nd chassis if anyone interested.after build std parts will be a viable /cranks cylinders heads covers generator .i have 16.5 wheels front rear 5 sets complete so when sorted above out first off on cnc set of triple clamps and will be able to start doing build/making chassis-rear blocks swinging arm.about 6wks off yet getting expensive and possible having to move machines to other location.if any one knows of units buildings a viable at reasonable rates for race shop in chester frodsham area that will take 3 machines 3phase lathe cnc miller 60t-press let me now

howie43
Posts: 45
Joined: Sun Apr 22, 2018 12:28 pm
Location: chester-england-uk

Re: ex tz350-750-rgb500-rider

#36 Post by howie43 » Thu Aug 09, 2018 2:07 pm

ign-carbs kienin air strike 38mm-brembo calipers arrived .waiting for ignition .need to sort reed blocks next possible v force any suggestions -cranks from america-dtr170 kit -suter clutch then ready to do engine build.done some research on frame possible going to build my own chassis using maxton shock and linkage by maxton-making former's for frame-i will be doing 2 off everything on this build so will be able to build 2nd chassis if anyone interested.after build std parts will be a viable /cranks cylinders heads covers generator .i have 16.5 wheels front rear 5 sets complete so when sorted above out first off on cnc set of triple clamps and will be able to start doing build/making chassis-rear blocks swinging arm.about 6wks off yet getting expensive and possible having to move machines to other location.if any one knows of units buildings a viable at reasonable rates for race shop in chester frodsham area that will take 3 machines 3phase lathe cnc miller 60t-press let me now

lost1750GTV
- - - - -
- - - - -
Posts: 609
Joined: Thu May 24, 2018 5:22 pm

Re: ex tz350-750-rgb500-rider

#37 Post by lost1750GTV » Thu Aug 09, 2018 2:52 pm

the transatlantic series was serious stuff

howie43
Posts: 45
Joined: Sun Apr 22, 2018 12:28 pm
Location: chester-england-uk

Re: ex tz350-750-rgb500-rider

#38 Post by howie43 » Fri Aug 10, 2018 5:34 am

the good days how its all changed

howie43
Posts: 45
Joined: Sun Apr 22, 2018 12:28 pm
Location: chester-england-uk

Re: ex tz350-750-rgb500-rider

#39 Post by howie43 » Fri Aug 10, 2018 5:35 am

:sad: :sad: the good days how its all changed

User avatar
wolfgangh
- - - - -
- - - - -
Posts: 1003
Joined: Thu Nov 17, 2005 5:37 am
Location: Vienna, Austria
Contact:

Re: ex tz350-750-rgb500-rider

#40 Post by wolfgangh » Sat Aug 11, 2018 6:50 am

Howie43,
for a non-native english speaker like me your posts are challenging. Can you try to build complete sentences with proper punctation? You may get more inputs then.

Cheers

Wolfgang

howie43
Posts: 45
Joined: Sun Apr 22, 2018 12:28 pm
Location: chester-england-uk

Re: ex tz350-750-rgb500-rider

#41 Post by howie43 » Sat Aug 11, 2018 12:32 pm

sorry never been my strong point english i do suffer with spelling

User avatar
Ax-Racing
Posts: 277
Joined: Sat Oct 24, 2009 5:11 am
Location: Modena (ITALY)

Re: ex tz350-750-rgb500-rider

#42 Post by Ax-Racing » Wed Aug 22, 2018 3:24 pm

howie43 wrote:thanks for reply's reference zee i purchased all in 1 cdi got it right
ax-seen your work excellent .i am struggling with making drawings on cad at moment learning do you have any drawings that i could use has a base drawing..in exchange im sure when cnc up and running we can do something for you hoping to cnc clutch cover dry clutch wit and with out kick start
king regards everyone steve
exactly what cad drawing you need ?
Alex

howie43
Posts: 45
Joined: Sun Apr 22, 2018 12:28 pm
Location: chester-england-uk

Re: ex tz350-750-rgb500-rider

#43 Post by howie43 » Thu Aug 23, 2018 2:00 am

chassis parts and layout . engine intake manifolds . crankcase modification .clutch cover.

thanks for showing interest i am bit slow at starting project. dads in hospital so having to look after business at present.
many regards it would be very appreciated and as i said i am willing to return the favor to yourself with parts

howie43
Posts: 45
Joined: Sun Apr 22, 2018 12:28 pm
Location: chester-england-uk

Re: ex tz350-750-rgb500-rider

#44 Post by howie43 » Thu Aug 30, 2018 5:29 pm

athena 170cc x4 kit arrived

howie43
Posts: 45
Joined: Sun Apr 22, 2018 12:28 pm
Location: chester-england-uk

Re: ex tz350-750-rgb500-rider

#45 Post by howie43 » Sun Oct 28, 2018 5:23 am

cranks arrived -can anyone out there tell me how to put pictures on site thanks

Post Reply