RZV rear swingarm conversion

Message

luisgallur · #1 Post by **luisgallur** » Mon Jul 07, 2008 9:15 am

I am going to convert an RZV to a RS250 swingarm. Is the width of the RZ pivot area and diameter of the swingarm bolt the same on RZ's and RZV's for a Wolfgang conversion.

vma500 · #2 Post by **vma500** » Wed Jul 09, 2008 3:01 am

pivot width is same for RD-RZV = ca 240mm

i cant measure RS pivot width ....it s still on the bike
but it seem OD from the pivot -axle is about 16mm on RS and RZV

i heard it fits with minor mods

wolfgangh · #3 Post by **wolfgangh** » Thu Jul 10, 2008 1:37 pm

OD of the RS250 swinagrm pivot axle is originally 20mm and I am converting that to 16mm with new needle bearing bushes on my conversions.

vma500 · #4 Post by **vma500** » Thu Jul 10, 2008 2:56 pm

yeah , 20mm is possible , rgv vj22= also 20mm

mine is a late RS 2003 model can t get a good measure

sorry

[img][img]http://i79.photobucket.com/albums/j140/ ... CT0088.jpg[/img][/img]