Search found 180 matches
- Sat Dec 03, 2016 5:21 am
- Forum: Engines
- Topic: TSS Power Valve Assembly
- Replies: 16
- Views: 4259
Re: TSS Power Valve Assembly
Better still, contact F5 in NZ, I think he might be in contact with "Wobbly", the designer of the TSS system.
- Thu Dec 01, 2016 2:32 am
- Forum: Yammer-Howling
- Topic: This is how you drag a knee.
- Replies: 11
- Views: 2291
Re: This is how you drag a knee.
Its all down to body shape and profile. I've followed a lanky bloke dragging his knee around every corner on a ZX10R, when I couldn't scrape the pegs on an old Guzzi. My short fat legs and forward controls didn't help. However, my RVF400 on slicks was cool, knee down easy. Had to be careful with ins...
- Sat Nov 26, 2016 7:33 am
- Forum: Engines
- Topic: Still cant get it smooth from idle to five grand.
- Replies: 17
- Views: 5187
Re: Still cant get it smooth from idle to five grand.
Ok Russell, I apologize for my assumption you were a cheap skate. But a worn needle jet (if that is the problem) is still a worn out unserviceable part. I maybe wrong, but trying to tune around it, which may be possible, seems futile. Are you trying to build a perfectly stock original resto, or just...
- Thu Nov 24, 2016 5:39 pm
- Forum: Engines
- Topic: Still cant get it smooth from idle to five grand.
- Replies: 17
- Views: 5187
Re: Still cant get it smooth from idle to five grand.
I have no experience with Keyster. Spook said "New carbs are not on even if they were available". I take this to mean he hasn't got the money ........................ Does this mean the rest of the build has been done on the cheap? :smt102 The only way to tune a bike, is properly. Using wo...
- Thu Nov 24, 2016 12:07 am
- Forum: Engines
- Topic: Still cant get it smooth from idle to five grand.
- Replies: 17
- Views: 5187
Re: Still cant get it smooth from idle to five grand.
Only option for new bits is a complete needle and jet set of different dimensions, but similar flow rate/or flow area as original.
- Wed Nov 23, 2016 5:49 pm
- Forum: Yammer-Howling
- Topic: This is how you drag a knee.
- Replies: 11
- Views: 2291
Re: This is how you drag a knee.
This next level could get expensive.
https://www.youtube.com/watch?v=qBF5zsJ0yfg" onclick="window.open(this.href);return false;
https://www.youtube.com/watch?v=qBF5zsJ0yfg" onclick="window.open(this.href);return false;
- Wed Nov 23, 2016 9:43 am
- Forum: Engines
- Topic: Still cant get it smooth from idle to five grand.
- Replies: 17
- Views: 5187
Re: Still cant get it smooth from idle to five grand.
cannot buy needle jets,also called emulsion tubes anywhere in the world. Therein lies the problem. Since the advent of "unleaded" fuel there has been a loss of lubrication in our go juice. Pre-mix doesn't suffer but if you are using auto lube, the oil is being introduced further down the ...
- Wed Nov 23, 2016 3:39 am
- Forum: Engines
- Topic: Piston Dome Dimensions
- Replies: 0
- Views: 1081
Piston Dome Dimensions
RS485 58 x 73
Wiseco 73mm piston - 10018M07300
Need to know the dimension of the dome (height) for calculating C/R.
Also anybody with same engine;
What compression pressure do you get?
Wiseco 73mm piston - 10018M07300
Need to know the dimension of the dome (height) for calculating C/R.
Also anybody with same engine;
What compression pressure do you get?
- Sun Nov 20, 2016 4:56 am
- Forum: Engines
- Topic: Big Bore Kits vs Cooling
- Replies: 39
- Views: 10993
Re: Big Bore Kits vs Cooling
Hey RuZty, XXXX (Four-ex) belongs to us Queenslanders, them K1 W1 fat assed chickens have got their own sheep piss.
- Sun Nov 13, 2016 9:59 pm
- Forum: Engines
- Topic: 421 cheetah help
- Replies: 48
- Views: 24202
Re: 421 cheetah help
Banshee gearing calculator - just input your primary & final drive, and wheel size. http://www.everything2stroke.com/content/40-Gearing-Calculator-Banshee" onclick="window.open(this.href);return false; You can also alter the individual ratios ...................... Or find the appropri...
- Fri Nov 11, 2016 5:50 am
- Forum: Engines
- Topic: Dumb aRSZd Newbie Question ....
- Replies: 16
- Views: 5601
Re: Dumb aRSZd Newbie Question ....
The education continues ........................... Jetting is close, its running pretty sweet down low. Drained the last of the fuel at 30:1 with Redline Racing 2T, destined for the lawn mower. Mixed a brew of Fuchs KR2 at 50:1 to see the difference. Theory is it will be richer fuel wise, ............
- Thu Nov 10, 2016 3:19 am
- Forum: Chassis, Brakes & Suspension
- Topic: Clutch cable - hybrid.
- Replies: 1
- Views: 944
Clutch cable - hybrid.
Anybody with an RS/RZ hybrid .............
................... what clutch cable are you using?
Standard RZ cable has 90 degree elbow as it leaves the perch.
I noticed a photo of a Banshee with a straight pull cable. Standard? I don't know.
Any tips for a better fit or routing of cable?
................... what clutch cable are you using?
Standard RZ cable has 90 degree elbow as it leaves the perch.
I noticed a photo of a Banshee with a straight pull cable. Standard? I don't know.
Any tips for a better fit or routing of cable?
- Wed Nov 09, 2016 7:12 pm
- Forum: Engines
- Topic: Dumb aRSZd Newbie Question ....
- Replies: 16
- Views: 5601
Re: Dumb aRSZd Newbie Question ....
MK I don't have a TPS, but your ignition tip I will keep in mind. Thus far everything seems to be on the rich side. Some of the settings/adjustments we have made indicate a change to the cut-a-way maybe, I said maybe, required. That's a last resort. We have lowered the float height 2.5mm (increased ...
- Wed Nov 09, 2016 6:55 pm
- Forum: Engines
- Topic: Dumb aRSZd Newbie Question ....
- Replies: 16
- Views: 5601
Re: Dumb aRSZd Newbie Question ....
CPI manufactured. Barrells designed by Wayne "Wobbly" Wright, (porting, pv housing & drive system). 24 of these were cast, port map is on the net. My blades were made & installed by a forum member, that's his technology to sell. Contact Peddro Peddro offered to get my bike going wh...
- Wed Nov 09, 2016 8:52 am
- Forum: Engines
- Topic: Dumb aRSZd Newbie Question ....
- Replies: 16
- Views: 5601
Re: Dumb aRSZd Newbie Question ....
I am not prepared to discuss ancient history in public, but I could separate fact from fiction. I have an Ignitech and a YPVS controller as Wobbly intended. Some of the componentry is not supplied by him but they work just fine, obviously. I chose not to use the FCR's as there is not enough worldly ...