RZ/RD 350 & Misc. 2-Stroke Tech BBS

Hello,
I am having troubles with my stock ignition system so I am forced to buy a new one.......any recommendations for a full ignition kit?

Thank you fro your reply,
I am tired of this bike not starting as it should so i am going to buy a complete new ignition system.....any recommendations? I need a really strong spark I don't want to risk to have a veak spark again

Hello, Rd 350 ypvs 1ua I have noticed that my flywheel lost magnetic properties......has anyone had this issue?.......is there a way to remagnetise it? I tried to buy a new magnet but i failed, all i found is the magnet for 31k and i know this one dosen't fit my bike 1ua..........so i was thinking o...

Looking for a flywheel for 1-ua model, if you have one send me a message or an email on tnsp977@gmail.com

I have a cheetah cub 465cc build on rd350 machine all in tz 125 frame. All I can say is the power is totaly insane, it is all most non rideable bike, when it hitts the powerband it revs to the moon and the power just keep comming and comming, you have to concetrate so much just to stay on the bike. ...

Ignition coil dosen't need to be grounded to work,but there is one black wire straching trought the all components which needs to be grounded on two points near the voltage regulator and near ignition coil

It is good question... that is what i thought to...and because of that I was not checking the regulator at first
My bike is ypvs 1ua

First of all thank you all for your help? The problem was the recitifier(voltage regulator) the + wire was short cutting to the mass trought the faulty recitifer I discovered that by measuring the amperage consumption between the battery and the bike while the key was off,there was 0.05 amps of cons...

It's the spark problem,yesterday i have checked the spark of the working rd and it is like 10 time more powerful than mine,so i started to check for the spark problem and find out that i have a strong spark just when i ground one of spark cables and at the other one i have a good spark but if is not...

That is what a thought,i was positive it was the fueling problem....but i have tried so many options of fuel delivery Tried:test tank,different options of float level,choke on,choke out,did'n mix any of carb components like placing wrong slide or wrong float bowls or any of the components have check...

After i start a bike it work for about 30-50s and then it stops even if i rev it high,after it is not possible to start it again
Have anyone had the same problem?
Have checked
Float level,spark,air screws,cleaned the carbs...using the correct sparks....no airbox...

When there is no other way ?

The problem was i had the ngk resistor caps and because of it the spark was weak,after i remove it the bike started

I am having a problem with very very hard start or no start at all,and i am suspecting it is of the veak spark....since there is no other rd bike with i could compare the spark,i am asking you guys to tel me how strong the spark usualy is on rd bike? On my bike I can hold it in my hand and kick i ju...