Wossner Pistons

General forum on engines, transmissions, gearing and modifications to each

Moderator: rztom

Post Reply
Message
Author
oldracer
Posts: 199
Joined: Mon Jun 06, 2005 12:27 am
Location: ontario, canada

Wossner Pistons

#1 Post by oldracer » Sat Feb 25, 2017 9:52 pm

I have a set of Wossner pistons in my '84 RZ 350 which is a track only bike. They have served me well but the time has come to replace them. Is there any where to get a good deal price wise or do I just have to bite the bullet again ?
Dave.

User avatar
pushstartrearset
-----
-----
Posts: 1339
Joined: Thu Mar 17, 2011 4:20 pm
Location: Vancouver, WA

Re: Wossner Pistons

#2 Post by pushstartrearset » Wed Mar 01, 2017 4:59 pm

http://www.fastfromthepast.com/pistons/yamaha <---Looks like an option. Located in Georgia (USA). Don't know the shipping, but will probably buy from them soon for the RZ.
1984 RZ350L (U.S.) Old Toomeys, oil injected!, Y-boot K&N. loctite throttle cable holder on left carb!! , 410 mains, Dynojet needles 2.0 clip, #20 pilot @ 1.5 turn a.s., 240/512 p.v.

oldracer
Posts: 199
Joined: Mon Jun 06, 2005 12:27 am
Location: ontario, canada

Re: Wossner Pistons

#3 Post by oldracer » Wed Mar 01, 2017 11:20 pm

Thanks, they look like the best deal. I'm in Florida right now so shipping is not a problem.
Dave.

User avatar
Questo vecchio rz
Posts: 1116
Joined: Sun Aug 16, 2015 5:55 pm
Location: Reconquista of California

Re: Wossner Pistons

#4 Post by Questo vecchio rz » Thu Mar 02, 2017 12:06 am

oldracer wrote:Thanks, they look like the best deal. I'm in Florida right now so shipping is not a problem.
Dave.
Old Dave..If you are in Florida, might try speaking w Tony Doukas of (Banshee Depot & TDR reeds) he is a member here by (TDR_50) and a racer, he is a native of Clearwater Florida, he might stock them and have some set up feedback.
Banshee (Baja) race bike,+ 2 A Arms,L.E.Ds, Toomey, +4 stroker IMS tank, run flats.
96 GSXR SRAD, Future Yoshimura rep.
85 custom Tri-Z
RZ/YZR bike(project)
86 VFR750 RC24 Merkel replica (project)
Royal Enfield Bullet 500

MK
Posts: 814
Joined: Sat Nov 26, 2005 11:44 am
Location: Wolfenbüttel, Germany
Contact:

Re: Wossner Pistons

#5 Post by MK » Thu Mar 02, 2017 7:55 am

If you need a +2.5 mm (66.5mm) oversize you may contact me as I have a brand new set for sale.
(Purchased for a repair and it turned out I even needed more overbore ...)
Bye
Martin

Post Reply