Carb Needles, ID them
Moderator: rztom
Carb Needles, ID them
I just picked up another set of carbs and the needles that are in them have 6 notches for the clip. Does anyone know who"s needles these are. I've never seen a needle with 6 notches only five. They are USA carbs and I'm assuming they are a kit needle from someone. Thanks to all who reply.
84 RZ350 Allspeed GP replica pipes, milled head, PWK 28mm Keihins, Y air boot/ k&n filter, VForce4’s, Zeel, Dynatec ignition coil,R6 calipers, Ohlins, sonic springs 80wt fork springs, FZ1 master cylinder.
-
Evans Ward
- -----
- Posts: 1546
- Joined: Sun Jun 07, 2009 6:39 pm
- Location: Macon, GA
Re: Carb Needles, ID them
Your picture isn't showing up for me.
84 RZ350-Toomeys,SCR milled head, stk 26 carbs,300 M, 35 P, stock regrooved needles AS 2.5 turns out,stk air box,Banshee reeds Zeel non-progr CDI,TSRL Program YPVS,alum rad,R6 shock,GV emulators w/RT springs,fork brace,Shindy steering damper.
Re: Carb Needles, ID them
![[/[URL=http://s1265.photobucket.com/use ... .jpg[/img]](%5B/%5BURL=http://s1265.photobucket.com/user/srhiskx/media/IMG_1313_zpszq1jxupe.jpg.html%5D%5Bimg%5Dhttp://i1265.photobucket.com/albums/jj516/srhiskx/IMG_1313_zpszq1jxupe.jpg%5B/img%5D){kind=link}
84 RZ350 Allspeed GP replica pipes, milled head, PWK 28mm Keihins, Y air boot/ k&n filter, VForce4’s, Zeel, Dynatec ignition coil,R6 calipers, Ohlins, sonic springs 80wt fork springs, FZ1 master cylinder.
-
T.RexRacing
- Posts: 1318
- Joined: Fri Nov 01, 2013 8:34 pm
- Location: back in the hills
Re: Carb Needles, ID them
DynoJet.
There is only one difference between a madman and me. The madman thinks he is sane. I know I am mad.
Salvador Dali
Salvador Dali