carb question

General forum on engines, transmissions, gearing and modifications to each

Moderator: rztom

Post Reply
Message
Author
17again
Posts: 10
Joined: Sun May 14, 2017 3:01 pm

carb question

#1 Post by 17again » Sat Jul 08, 2017 2:07 pm

i was thinking of changing my carbs to 28mm

but then i seen that you can get a Dynojet Stage 3 Jet Kit

my bike was a 250 ypvs 29l but now i have just added some 350 barrels + oil pump.

just trying to find out the best way really if its worth me getting the kit?

Image

Image

Image

waltmil
Posts: 491
Joined: Fri Dec 28, 2012 9:23 pm
Location: Panacea, FL USA

Re: carb question

#2 Post by waltmil » Sat Jul 08, 2017 3:13 pm

Those look like US carbs but the US didn't get the 250. I think an upgrade would be a good idea. Maybe some PWKs with the oil injection mod.
Red/White US '84, Spec II pipes, Y-boot w/K&N, Fox Shock, Mikuni carbs?

17again
Posts: 10
Joined: Sun May 14, 2017 3:01 pm

Re: carb question

#3 Post by 17again » Sun Jul 09, 2017 6:10 am

there proving a nit hard to find here in the uk.

does any know the jet sizes and settings for the jap or us 350?

17again
Posts: 10
Joined: Sun May 14, 2017 3:01 pm

Re: carb question

#4 Post by 17again » Wed Jul 12, 2017 3:54 am

would any know the needle height for these carbs on a 350?

mike91
Posts: 12
Joined: Wed Mar 01, 2017 8:39 pm

Re: carb question

#5 Post by mike91 » Mon Aug 21, 2017 6:39 pm

I pulled apart a set of stock carbs at the track this weekend only to find there is no needle adjustment!

Post Reply