I was trying to trenched rd350 31k cases for the 10 mil setup,forgot to change the tool setting in the cnc machine so now i have a hole in the cases.
Was trying to buy another lower unit on ebay but there i can just find cases from year 74 and so.....on
My question is are all lower cases the same,which can i fit on the 31k transmision and upper unit case?
LOWER CASES ALL THE SAME OR?
Moderator: rztom
Re: LOWER CASES ALL THE SAME OR?
Is the new hole in a bad place? Just tap it and thread in a plug would seem to be the easiest and cheapest fix.
'82 RD350LC in '81 colours, OEM pipes, UNI filters
'85 FZ750
'85 FZ750
- T.RexRacing
- Posts: 1318
- Joined: Fri Nov 01, 2013 8:34 pm
- Location: back in the hills
Re: LOWER CASES ALL THE SAME OR?
The crank bearing bores are line bored. Not a good idea mixing cases.
There is only one difference between a madman and me. The madman thinks he is sane. I know I am mad.
Salvador Dali
Salvador Dali
Re: LOWER CASES ALL THE SAME OR?
you need a matched set of cases as Trex says, they are numbered for that reason on the stator side.
Weld up the hole, easy...
Weld up the hole, easy...
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
Re: LOWER CASES ALL THE SAME OR?
I have an undamaged 1983 case if you need one .
Re: LOWER CASES ALL THE SAME OR?
Thank you all for your replys
Since it is not so smart to mix cases first i will try to weld or epoxy the hole
Since it is not so smart to mix cases first i will try to weld or epoxy the hole