While finishing up this stock '84 of unknown history I just couldn't get it to sync right and run quite right.
Especially when I couldn't get stock RZ carbs or Banshee carbs tuned right.
Then noticed not much exhaust pressure at end of pipe when revved over 3K-ish, on only RH pipe.
WTH? but it was the cylinder I couldn't get right so....
besides also finding out the carb linkage was not allowing correct sync, fixed that and got different exhaust. Pulled old exhaust and baffles.
RH side still filled w/ catalyst, NICE restriction
LH side was already cleaned out.
Amazing how tough that makes tuning,
'Exhausting' tuning carbs, to funny
Moderator: rztom
-
- Posts: 7
- Joined: Mon Jan 16, 2017 9:24 pm
'Exhausting' tuning carbs, to funny
- Attachments
-
- NICE
- oe5a.jpg (105.82 KiB) Viewed 1553 times
-
- Catalyzer coming out
- oe4a.jpg (170.42 KiB) Viewed 1553 times
-
- LH
- oe1a.jpg (87.15 KiB) Viewed 1553 times
-
- Posts: 1375
- Joined: Tue Nov 12, 2013 2:34 am
Re: 'Exhausting' tuning carbs, to funny
Wow! Serious restriction in there! Which pipes are those?
Re: 'Exhausting' tuning carbs, to funny
Details explained here:
http://rd350lc.net/pageCATA.htm" onclick="window.open(this.href);return false;
http://rd350lc.net/pageCATA.htm" onclick="window.open(this.href);return false;
Bye
Martin
Martin
-
- Posts: 7
- Joined: Mon Jan 16, 2017 9:24 pm
Re: 'Exhausting' tuning carbs, to funny
full story of this bike here
https://www.youtube.com/watch?v=g4rHVmpLlRo" onclick="window.open(this.href);return false;
https://www.youtube.com/watch?v=g4rHVmpLlRo" onclick="window.open(this.href);return false;
-
- Posts: 7
- Joined: Mon Jan 16, 2017 9:24 pm
Re: 'Exhausting' tuning carbs, to funny
Now with follow up video of this issue
https://www.youtube.com/watch?v=PAhFEkY ... e=youtu.be" onclick="window.open(this.href);return false;
https://www.youtube.com/watch?v=PAhFEkY ... e=youtu.be" onclick="window.open(this.href);return false;