Offset Front Sprockets
Moderator: rztom
Offset Front Sprockets
Who in the USA manufacturers offset front sprockets with 4 to 5mm offset ?
Cryin' In The Beer Of A Drunk Man
Re: Offset Front Sprockets
I don’t think anyone does
You would need to buy a 10mm from say Fast from the past and then grind down the bushing/collar that sticks out from the cases over the outputshaft.
It’s hardened steel btw.
You would need to buy a 10mm from say Fast from the past and then grind down the bushing/collar that sticks out from the cases over the outputshaft.
It’s hardened steel btw.
- Questo vecchio rz
- Posts: 1116
- Joined: Sun Aug 16, 2015 5:55 pm
- Location: Reconquista of California
Re: Offset Front Sprockets
Call these folks, the made me sprockets on two occasions. Made to order.
http://sprocketspecialists.com/" onclick="window.open(this.href);return false;
http://sprocketspecialists.com/" onclick="window.open(this.href);return false;
Banshee (Baja) race bike,+ 2 A Arms,L.E.Ds, Toomey, +4 stroker IMS tank, run flats.
96 GSXR SRAD, Future Yoshimura rep.
85 custom Tri-Z
RZ/YZR bike(project)
86 VFR750 RC24 Merkel replica (project)
Royal Enfield Bullet 500
96 GSXR SRAD, Future Yoshimura rep.
85 custom Tri-Z
RZ/YZR bike(project)
86 VFR750 RC24 Merkel replica (project)
Royal Enfield Bullet 500