Cool head compatibility
Moderator: rztom
Cool head compatibility
Hi guys, I'm new to your forum , fantastic forum by the way . I have done some research on this subject & cant find the answer. I currently have a rz350 1ua with 421 cpi cub with PD cool head & im changing it back to Oem cylinders bored out to 66.5mm. Will my cool head fit the 1ua cylinders . I will get some 66mm domes cut to suit the stroked long rod crank. Thanks guys hope someone can enlighten me on this subject.
Re: Cool head compatibility
Disclaimer: I am not sure, but I think I remember that the difference between a Banshee Cool Head and one for an RZ is (was?) the rear hose outlet orientation, which is to say yes, if your head is compatible with Banshee cylinders it's compatible with RZ cylinders.
85 RZ350 daily rider Toomeys, FZ swinger & wheel, Fox shock, Raasks
85 RZ350 JLs, FZ swinger, Katana rear & CBR929 front wheel, CBR600F4 forks & brakes
75 RD350 Ritter-tuned top end, PWK28s, JLs, HPI, TDR wheels, GSX-R forks, Motolana swinger
85 RZ350 JLs, FZ swinger, Katana rear & CBR929 front wheel, CBR600F4 forks & brakes
75 RD350 Ritter-tuned top end, PWK28s, JLs, HPI, TDR wheels, GSX-R forks, Motolana swinger
Re: Cool head compatibility
Thanks 85rzWade, that's good news, I have dealt with the outlet on the Cub set up the bike currently has with an inline thermostat & a 90 degree hose thanks to one of Jon W's posts, I just wasn't sure about the water jackets next to the front studs as my oem barrells are out getting a re-bore & I can't size them up. I'm sure I will have a few more questions re this build that I hope you guys can help me with. Cheers Mark
Re: Cool head compatibility
Pretty sure the cub head won’t fit ypvs barrels.
Jess
Jess
Re: Cool head compatibility
No, the cub head does NOT fit the RZ.
ProDesign make another one for the RZ as well as their Banshee head. Or at double the price you can buy the Wicked head. For you appllcation there is nothing wrong with the stock head.
ProDesign make another one for the RZ as well as their Banshee head. Or at double the price you can buy the Wicked head. For you appllcation there is nothing wrong with the stock head.
350 Prod. SCTA Bonneville World Landspeed record holder
500 Prod. SCTA Bonneville World record holder
350 Prod. AMA Bonneville National record holder
350 P-MG AMA Bonneville National record holder
AMA No.1plate holder x2
Pioneer- Motorsport Hall of Fame
500 Prod. SCTA Bonneville World record holder
350 Prod. AMA Bonneville National record holder
350 P-MG AMA Bonneville National record holder
AMA No.1plate holder x2
Pioneer- Motorsport Hall of Fame
- Questo vecchio rz
- Posts: 1116
- Joined: Sun Aug 16, 2015 5:55 pm
- Location: Reconquista of California
Re: Cool head compatibility
What ya doin w your Cheetah cylinders?
Banshee (Baja) race bike,+ 2 A Arms,L.E.Ds, Toomey, +4 stroker IMS tank, run flats.
96 GSXR SRAD, Future Yoshimura rep.
85 custom Tri-Z
RZ/YZR bike(project)
86 VFR750 RC24 Merkel replica (project)
Royal Enfield Bullet 500
96 GSXR SRAD, Future Yoshimura rep.
85 custom Tri-Z
RZ/YZR bike(project)
86 VFR750 RC24 Merkel replica (project)
Royal Enfield Bullet 500
Re: Cool head compatibility
Thanks rztuner, I thought that might be the case. I will get the Oem head re profiled for the 4mm long rod crank, i will put the cheater top end on the shelf for a later build. Thanks for your input.