Banshee shift drum in RZ350

General forum on engines, transmissions, gearing and modifications to each

Moderator: rztom

Post Reply
Message
Author
paulincayman
Posts: 17
Joined: Mon Oct 31, 2016 9:02 pm

Banshee shift drum in RZ350

#1 Post by paulincayman » Sat Sep 15, 2018 9:40 pm

Hi Guys
Can anyone tell me if the banshee shift drum will work with the RD/RZ350pv engine . seems they are still available

Thanks
Paul

User avatar
L.B
Posts: 2008
Joined: Sat Aug 13, 2011 9:59 am
Location: Hunter Valley,Australia
Contact:

Re: Banshee shift drum in RZ350

#2 Post by L.B » Sat Sep 15, 2018 11:13 pm

Dont know for sure sorry but I've used banshee shift forks in rz box/selector drum with nps.

User avatar
JonW
Posts: 10598
Joined: Sat Oct 10, 2009 4:33 am
Location: Sydney
Contact:

Re: Banshee shift drum in RZ350

#3 Post by JonW » Sun Sep 16, 2018 12:31 am

Should be the same I would think. Is it the same part number?
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid

Like Watches? www.PloProf.com & www.DeskDivers.com

paulincayman
Posts: 17
Joined: Mon Oct 31, 2016 9:02 pm

Re: Banshee shift drum in RZ350

#4 Post by paulincayman » Sun Sep 16, 2018 9:19 am

JonW wrote:Should be the same I would think. Is it the same part number?
Banshee is 2GU. RZ is 29L. But look the same on parts fiche...

paulincayman
Posts: 17
Joined: Mon Oct 31, 2016 9:02 pm

Re: Banshee shift drum in RZ350

#5 Post by paulincayman » Sun Sep 16, 2018 9:45 am

Shift forks and drive shaft have same pn, main shaft is different. I think the banshee gears Are wider? So would they require a different drum pattern?

MK
Posts: 813
Joined: Sat Nov 26, 2005 11:44 am
Location: Wolfenbüttel, Germany
Contact:

Re: Banshee shift drum in RZ350

#6 Post by MK » Sun Sep 16, 2018 12:25 pm

I swapped just the shafts between the RZ and banshee leaving the original drum/forks in the case.
That works fine, so I strongly suspect if there'd be any difference required on the drum to run a banshee tranny, I'd have noticed.
Logically it should work using the banshee drum in the RZ.

The difference in the shafts is that the banshee runs different ratios in a couple of gears (5'th to 6'th for example is a bigger jump than on the RZ).
Bye
Martin

paulincayman
Posts: 17
Joined: Mon Oct 31, 2016 9:02 pm

Re: Banshee shift drum in RZ350

#7 Post by paulincayman » Sun Sep 16, 2018 12:30 pm

Thanks Gents..
All very helpful as always.
Paul

Post Reply