Petros RZ's .....
Moderator: rztom
Petros RZ's .....
Hi to all , I'm new on this forum but RD 2 stroke adicted. I've seen lots of intresting threads here at profesional levels.
My location is Greece near Athens city << Piraeus town >>.
I love RD/RZ 350 and own three of them.At this stage I just completed a full rebuilt of an RZ 250 Mod 1983 29L type
My other project I'm working on is a RD 350 31k to convert it with RGV 250 Vj22 front & banana swingarm and put in engine cheetah cub kit 425cc aprox 95 bhp on the wheel.
I'll post here the RZ 250 rebuilt but not fully satisfied fm 250 engine performance and shall change and put the 31K engine on fully tuned with jolly pipes. Here is a pic of condition when bike was purchased exact on Christmas 25/Dec/2008 fm a collector in a village 160 km fm my town.
http://s686.photobucket.com/albums/vv22 ... 010099.jpg
My location is Greece near Athens city << Piraeus town >>.
I love RD/RZ 350 and own three of them.At this stage I just completed a full rebuilt of an RZ 250 Mod 1983 29L type
My other project I'm working on is a RD 350 31k to convert it with RGV 250 Vj22 front & banana swingarm and put in engine cheetah cub kit 425cc aprox 95 bhp on the wheel.
I'll post here the RZ 250 rebuilt but not fully satisfied fm 250 engine performance and shall change and put the 31K engine on fully tuned with jolly pipes. Here is a pic of condition when bike was purchased exact on Christmas 25/Dec/2008 fm a collector in a village 160 km fm my town.
http://s686.photobucket.com/albums/vv22 ... 010099.jpg
Last edited by petros67 on Fri Aug 31, 2012 5:40 am, edited 1 time in total.
- alexanderdraper
- Posts: 654
- Joined: Tue Jan 09, 2007 9:03 pm
- Location: Whitby Ontario canada
Rebuilt RZ 250 Mod 1983 Type 29L fm Greece
Here you could see complete rebuilt at several stages and at the end finished. Complete project took me aprox 5 months , lots of time , lots of euros , lots of hunting around parts fm ebay etc , but the result awarded me.
Now I shall take off 250 engine and install a 350 31K with stock barrels fully tuned , Wiseco pistons , Jolly moto pipes.
http://s686.photobucket.com/albums/vv22 ... 010127.jpg
http://s686.photobucket.com/albums/vv22 ... 010129.jpg
http://s686.photobucket.com/albums/vv22 ... things.jpg
http://s686.photobucket.com/albums/vv22 ... 010199.jpg
http://s686.photobucket.com/albums/vv22 ... 010203.jpg
http://s686.photobucket.com/albums/vv22 ... 010224.jpg
http://s686.photobucket.com/albums/vv22 ... 010229.jpg
Clocks like new
http://s686.photobucket.com/albums/vv22 ... 010226.jpg
Finished
http://s686.photobucket.com/albums/vv22 ... 010249.jpg
Now I shall take off 250 engine and install a 350 31K with stock barrels fully tuned , Wiseco pistons , Jolly moto pipes.
http://s686.photobucket.com/albums/vv22 ... 010127.jpg
http://s686.photobucket.com/albums/vv22 ... 010129.jpg
http://s686.photobucket.com/albums/vv22 ... things.jpg
http://s686.photobucket.com/albums/vv22 ... 010199.jpg
http://s686.photobucket.com/albums/vv22 ... 010203.jpg
http://s686.photobucket.com/albums/vv22 ... 010224.jpg
http://s686.photobucket.com/albums/vv22 ... 010229.jpg
Clocks like new
http://s686.photobucket.com/albums/vv22 ... 010226.jpg
Finished
http://s686.photobucket.com/albums/vv22 ... 010249.jpg
- alexanderdraper
- Posts: 654
- Joined: Tue Jan 09, 2007 9:03 pm
- Location: Whitby Ontario canada
petros:
if you want the pics to show on in the post copy and past the 'image code'
will look like this
but without the spaces between the
nice looking bike!
that seat is trick. love the paint!
you do very nice work!
if you want the pics to show on in the post copy and past the 'image code'
will look like this
but without the spaces between the
nice looking bike!
that seat is trick. love the paint!
you do very nice work!
Porting&pipes by GPL racing, hotrods 4mm crank,
mikuni36mmTM, zeel ignition, V-Force4, gusseted 86frame, Fz600 swingarm, 89gsxr750 wheels&brakes, Elka shock, fzr600 forks with r6 internals fitted by accelerated tech
mikuni36mmTM, zeel ignition, V-Force4, gusseted 86frame, Fz600 swingarm, 89gsxr750 wheels&brakes, Elka shock, fzr600 forks with r6 internals fitted by accelerated tech
As saying goes a project never ends.
Same stands for my RZ 250. I shall upgrade her best posible way such as brakes by placing machined caliber brackets inorder to fit RGV 250 Tokico front calibers on stock fork fittings , a Tarozzi forks stabilizater & last Kagizume wayvy discs that fit direct on RZ stock wheels.
I want to have on this bike stock fronts & swingarm but upgraded inorder to perform safest possible for next step of engine exchange.
I shall exchange complete RZ 250 29L engine with a 350 31K step two tuned barrels , Pro-x pistons , new crank with jolly moto exhausts.
Doner engine bike is my other RD 350 which her frame will accept the kit cub banshee 425 cc engine with Lomas exausts etc RGV fronts /rear etc.....
Heres a photo of my 2 stroke collection for time being.
RD 350 31K , RZ 250 29L , Husky SM 125.
Same stands for my RZ 250. I shall upgrade her best posible way such as brakes by placing machined caliber brackets inorder to fit RGV 250 Tokico front calibers on stock fork fittings , a Tarozzi forks stabilizater & last Kagizume wayvy discs that fit direct on RZ stock wheels.
I want to have on this bike stock fronts & swingarm but upgraded inorder to perform safest possible for next step of engine exchange.
I shall exchange complete RZ 250 29L engine with a 350 31K step two tuned barrels , Pro-x pistons , new crank with jolly moto exhausts.
Doner engine bike is my other RD 350 which her frame will accept the kit cub banshee 425 cc engine with Lomas exausts etc RGV fronts /rear etc.....
Heres a photo of my 2 stroke collection for time being.
RD 350 31K , RZ 250 29L , Husky SM 125.
Glad you like it. Today started progress for brake improvement etc...
The blue light is for high beam headlight. This is a Jap imported bike & a strange red light is located exact under the neutral green light ( right side of dash ). This is because in Japan speed limit for all bikes is 80 kilometers.
Incase you exceed 80 kilometers then this red light opens. All I did was paint it black fm the inside and take of the bulb so no light opens over 80 kilometers & looks great.
The blue light is for high beam headlight. This is a Jap imported bike & a strange red light is located exact under the neutral green light ( right side of dash ). This is because in Japan speed limit for all bikes is 80 kilometers.
Incase you exceed 80 kilometers then this red light opens. All I did was paint it black fm the inside and take of the bulb so no light opens over 80 kilometers & looks great.
As mentioned on previous post improvement completed.
Complete rebuilt front forks , caliber adaptors to fit RGV tokico calibers , new brake pads , new rotors , fork brace tarozzi.
All in good working order.
Everything is ready on my RZ to fit the 350 31K tuned engine with jolly moto pipes.
Wanted all the stock parts with best posible improvement to make bike safer.
Here is a video I took with my go pro camera. First attempt and camera did not go on correct position but gives an idea how bike runs now.
http://www.youtube.com/watch?v=1JYhJj6afOE
Complete rebuilt front forks , caliber adaptors to fit RGV tokico calibers , new brake pads , new rotors , fork brace tarozzi.
All in good working order.
Everything is ready on my RZ to fit the 350 31K tuned engine with jolly moto pipes.
Wanted all the stock parts with best posible improvement to make bike safer.
Here is a video I took with my go pro camera. First attempt and camera did not go on correct position but gives an idea how bike runs now.
http://www.youtube.com/watch?v=1JYhJj6afOE
My RZ 350 31K stage two tuned barrels engine is completed
I took off my RZ 250 engine off bikes frame and ready to fit the 350 with jolly moto exhausts..
I felt a small pain in the heart taking off the 250 engine because it gave me that two stroke feeling but was replaced for the better.
I intend to sell the RZ 250 YPVS engine which was also fully rebuilt.
Here's a small video I took with the 250 engine pulling until 4th gear so I can compare after with the 350.
http://www.youtube.com/watch?v=aERQIYAaj6s
Shall revert with full photos once engine & exhausts on.
Petros
I took off my RZ 250 engine off bikes frame and ready to fit the 350 with jolly moto exhausts..
I felt a small pain in the heart taking off the 250 engine because it gave me that two stroke feeling but was replaced for the better.
I intend to sell the RZ 250 YPVS engine which was also fully rebuilt.
Here's a small video I took with the 250 engine pulling until 4th gear so I can compare after with the 350.
http://www.youtube.com/watch?v=aERQIYAaj6s
Shall revert with full photos once engine & exhausts on.
Petros
- aaronmvrider
- -----
- Posts: 6607
- Joined: Tue Sep 02, 2008 7:44 am
- Location: Central Coast N.S.W Australia
At last she is a two stage 350 !!!!!
Stan Stephens knows what he is doing when tuning.
Everything inside engine completely fresh.
I took her for a quick spin and can say she shows her angry teeth even at very low RPM as I'm running her.
Also Jolly moto exhausts sound fantastic offering heavy two stroke music to my ears .
I'm really satisfied.
PS > ( won't accept less then 65 bhp but only more ) <
Here she is :
Kick start fm NK racing Nigel.
View of silencers
Had an issue with side stand spring hitting on pipe when at closed position , had to relocate spring to the outside and issue solved
Hope you like it.
Now almost at finish of my other project RD/RGV 425 cc.
Shall post soon pictures.
Petros
Stan Stephens knows what he is doing when tuning.
Everything inside engine completely fresh.
I took her for a quick spin and can say she shows her angry teeth even at very low RPM as I'm running her.
Also Jolly moto exhausts sound fantastic offering heavy two stroke music to my ears .
I'm really satisfied.
PS > ( won't accept less then 65 bhp but only more ) <
Here she is :
Kick start fm NK racing Nigel.
View of silencers
Had an issue with side stand spring hitting on pipe when at closed position , had to relocate spring to the outside and issue solved
Hope you like it.
Now almost at finish of my other project RD/RGV 425 cc.
Shall post soon pictures.
Petros
- aaronmvrider
- -----
- Posts: 6607
- Joined: Tue Sep 02, 2008 7:44 am
- Location: Central Coast N.S.W Australia
looks awsome Petros, be sure to post video of a run through the gears ....
i just dropped my engine parts at the sandblaster / painters, progressing slowly, but eventually it will be ready all freshened up
i just dropped my engine parts at the sandblaster / painters, progressing slowly, but eventually it will be ready all freshened up
1 x 4mm stroker rz 375cc 1983
1 x 7mm stroker rz 443cc 1984 (under construction)
1 x rz 500
1 x mv agusta 1000
1 x 7mm stroker rz 443cc 1984 (under construction)
1 x rz 500
1 x mv agusta 1000
- aaronmvrider
- -----
- Posts: 6607
- Joined: Tue Sep 02, 2008 7:44 am
- Location: Central Coast N.S.W Australia