Headlight clips - installation

A place for LC enthusiasts to hang out!

Moderators: rztom, 2smoke

Post Reply
Message
Author
Angus McL
Posts: 47
Joined: Fri Mar 21, 2014 11:08 am
Location: Halifax, NS, Canada

Headlight clips - installation

#1 Post by Angus McL » Sun Mar 13, 2016 10:43 am

Has anyone got pics in their library, or a headlight on the bench to show me how the three little clips hold the headlight in the bezel? Mine had alum tape holding the headlight in place, so I got some of the clips from Yambits. I've been doing some head scratching though... Not sure if my bezel is missing some tabs maybe...

Thanks,

A.

LC Cnd
-----
-----
Posts: 1454
Joined: Sat Feb 08, 2014 5:39 pm
Location: Vancouver Is. Canada

Re: Headlight clips - installation

#2 Post by LC Cnd » Sun Mar 13, 2016 1:02 pm

Hope this helps Angus.
Attachments
IMG_3049.JPG
IMG_3049.JPG (102.73 KiB) Viewed 2116 times

Angus McL
Posts: 47
Joined: Fri Mar 21, 2014 11:08 am
Location: Halifax, NS, Canada

Re: Headlight clips - installation

#3 Post by Angus McL » Sun Mar 13, 2016 3:03 pm

Perfect! Thanks!

A.

LC Cnd
-----
-----
Posts: 1454
Joined: Sat Feb 08, 2014 5:39 pm
Location: Vancouver Is. Canada

Re: Headlight clips - installation

#4 Post by LC Cnd » Mon Mar 14, 2016 12:48 am

Huh. Not quite perfect. Just noticed that the clip at 4 o'clock is reversed. The others are correct.

Angus McL
Posts: 47
Joined: Fri Mar 21, 2014 11:08 am
Location: Halifax, NS, Canada

Re: Headlight clips - installation

#5 Post by Angus McL » Mon Mar 14, 2016 8:40 am

I was thinking the bosses cast into the glass rim must be for locating the clips, but just couldn't make it work that way.

LC Cnd
-----
-----
Posts: 1454
Joined: Sat Feb 08, 2014 5:39 pm
Location: Vancouver Is. Canada

Re: Headlight clips - installation

#6 Post by LC Cnd » Mon Mar 14, 2016 11:34 am

The retainer clips lay on top of the inner rim and the rim is uniform all around.
Attachments
IMG_3056.JPG
IMG_3056.JPG (144.07 KiB) Viewed 2050 times

Post Reply