Hi,
I wanted to put wossner forged connecting rods in my rd 350 lc 4l0 crank.
Seems there are only banshee 350 rods are available in market!
As anyone here tried putting these?
Thanks
Banshee rods in RD 350 4L0 Crank ?
Re: Banshee rods in RD 350 4L0 Crank ?
No.. RZ (valvie) rods are 1mm wider at the big end .. don't fit.
Are not OEM Yama rods Forged ?
Despite claims IMO nothing Wossner is superior to OEM yama
Are not OEM Yama rods Forged ?
Despite claims IMO nothing Wossner is superior to OEM yama
-
- Posts: 6
- Joined: Wed Jul 27, 2016 5:33 am
Re: Banshee rods in RD 350 4L0 Crank ?
Thanks bare,
Got to know the big end difference, so I ordered a pair of yambits 4l0 lc rods and mitaka pistons.
Sent from my MI 4W using Tapatalk
Got to know the big end difference, so I ordered a pair of yambits 4l0 lc rods and mitaka pistons.
Sent from my MI 4W using Tapatalk
Re: Banshee rods in RD 350 4L0 Crank ?
Are you sure Yam bits isn't passing off some Lo quality rods?
They don't have a good history of supplying "good' parts.
They don't have a good history of supplying "good' parts.