General forum on frames, brakes, suspension, wheels and tires
Moderator: rztom
-
ROTAX624
- Posts: 12
- Joined: Tue May 12, 2015 6:58 pm
#346
Post
by ROTAX624 » Mon Feb 01, 2016 3:27 pm
L.B wrote:Hey Peter any updates on this second batch yet?
This is an email that i got in 30/1/16:
Hey yossi
They should be ready in February or March. . Prices are not certain yet, also depends on finish, anodized or not..
They come without master cylinder.
Prices will probably between 350/400 dollars without VAT. But not fixed yet.
Regards
Mathias Mogensen
T12
-
peterz84
- -----
- Posts: 876
- Joined: Sun Mar 05, 2006 8:42 pm
- Location: New England
#347
Post
by peterz84 » Mon Feb 01, 2016 6:27 pm
Just spoke with t12 today. Main plates being machined right now. Should be ready to ship beginning of March... I believe there are 10 sets being produced, of those 10, four or five are spoken for. Email T12 Tech to get in your orders.
Thanks
Pete
-
L.B
- Posts: 2008
- Joined: Sat Aug 13, 2011 9:59 am
- Location: Hunter Valley,Australia
-
Contact:
#348
Post
by L.B » Mon Feb 01, 2016 9:16 pm
Thanks for the update Pete.
http://www.t12tech.com/" onclick="window.open(this.href);return false;
-
peterz84
- -----
- Posts: 876
- Joined: Sun Mar 05, 2006 8:42 pm
- Location: New England
#349
Post
by peterz84 » Mon Feb 01, 2016 9:23 pm
No problem, thanks for your support guys
Pete
-
twostrokebloke
- Posts: 9
- Joined: Sun Nov 08, 2015 9:47 pm
#350
Post
by twostrokebloke » Tue Feb 02, 2016 2:44 am
I have Tarozzi's also don't like them, too cramp,so I'll be interested,if yours pegs will sit lower!
-
peterz84
- -----
- Posts: 876
- Joined: Sun Mar 05, 2006 8:42 pm
- Location: New England
#351
Post
by peterz84 » Wed Feb 03, 2016 10:19 am
twostrokebloke wrote:I have Tarozzi's also don't like them, too cramp,so I'll be interested,if yours pegs will sit lower!
I have a set of terozzis here I think, I'll check it out for you and take a couple pics
Pete
-
peterz84
- -----
- Posts: 876
- Joined: Sun Mar 05, 2006 8:42 pm
- Location: New England
#352
Post
by peterz84 » Mon Feb 29, 2016 3:58 pm
Second run done.
Thanks
Pete
-
aaronmvrider
- -----
- Posts: 6607
- Joined: Tue Sep 02, 2008 7:44 am
- Location: Central Coast N.S.W Australia
#353
Post
by aaronmvrider » Mon Feb 29, 2016 6:01 pm
who is selling these now...
i am keen
1 x 4mm stroker rz 375cc 1983
1 x 7mm stroker rz 443cc 1984 (under construction)
1 x rz 500
1 x mv agusta 1000
-
Yellow and Black RZ
- Posts: 379
- Joined: Thu Sep 27, 2007 3:59 pm
#354
Post
by Yellow and Black RZ » Mon Feb 29, 2016 6:18 pm
Man.. I go get married and have a kid and all the cool stuff happens.
Very nice rearsets Pete! Appreciate your coming up with these for the community.
'85 RRZ350 - Hacked.
-
peterz84
- -----
- Posts: 876
- Joined: Sun Mar 05, 2006 8:42 pm
- Location: New England
#355
Post
by peterz84 » Mon Feb 29, 2016 10:08 pm
Thank you guys... You can buy them here:
http://t12tech.com/index.html" onclick="window.open(this.href);return false;
We made ten sets this run, 5 black, 5 raw... Still a few sets left as as this morning. If you're interested try to get in while there's some of both still left.
Thanks
Pete
-
aaronmvrider
- -----
- Posts: 6607
- Joined: Tue Sep 02, 2008 7:44 am
- Location: Central Coast N.S.W Australia
#356
Post
by aaronmvrider » Tue Mar 01, 2016 7:35 pm
message sent to t12tech !!!
1 x 4mm stroker rz 375cc 1983
1 x 7mm stroker rz 443cc 1984 (under construction)
1 x rz 500
1 x mv agusta 1000
-
peterz84
- -----
- Posts: 876
- Joined: Sun Mar 05, 2006 8:42 pm
- Location: New England
#357
Post
by peterz84 » Wed Mar 02, 2016 8:53 pm
Thanks Aaron. Here's a pic of a couple of the black sets going out.
-
aaronmvrider
- -----
- Posts: 6607
- Joined: Tue Sep 02, 2008 7:44 am
- Location: Central Coast N.S.W Australia
#358
Post
by aaronmvrider » Fri Mar 04, 2016 5:42 pm
just a few questions...
will the standard gear lever push rod work with these ??
is there no brake light switch for these ??
apart from the master cylinder nothing else is required for these.. all other parts are supplied,, exhaust mounts and all hardware ??
1 x 4mm stroker rz 375cc 1983
1 x 7mm stroker rz 443cc 1984 (under construction)
1 x rz 500
1 x mv agusta 1000
-
kpke
- -----
- Posts: 2535
- Joined: Sun Nov 23, 2008 2:22 pm
- Location: Livermore, CA
#359
Post
by kpke » Sat Mar 05, 2016 11:55 am
aaronmvrider wrote:just a few questions...
will the standard gear lever push rod work with these ??
is there no brake light switch for these ??
apart from the master cylinder nothing else is required for these.. all other parts are supplied,, exhaust mounts and all hardware ??
No. I purchased rods in a few lengths from Fast From the Past. Rod ends off ebay or amazon.
No. Use a pressure switch. Cheap ebay item. I have this configuration working on the 500. I bought 2 way back when but you have to be careful of the thread pitch on whatever master you use. My spare would not work on the Brembo I bought for these rear sets. It has fine pitch threads. Had to order another one.
Exhaust mounts and other hardware were on the set I bought and work great. Well, not "riding" great just yet.
I'll take some pics later and probably have details on the items I bought.
-
RuZty
- -----
- Posts: 3584
- Joined: Fri Oct 03, 2003 11:11 pm
- Location: Southern Ontario, Canada
#360
Post
by RuZty » Sat Mar 05, 2016 7:33 pm
aaronmvrider wrote:just a few questions...
will the standard gear lever push rod work with these ??
See my post on the previous page, early R6 parts can be made to fit, and give you adjustment either side of stock leverage ratio.