Rearset interest
Moderator: rztom
Rearset interest
Any of you guys have any in rearsets? I'm going to get a few sets made for me and can run more if needed.
http://imageshack.us/a/img541/3773/hspp.jpg" onclick="window.open(this.href);return false;
Pete
http://imageshack.us/a/img541/3773/hspp.jpg" onclick="window.open(this.href);return false;
Pete
Re: Rearset interest
Yes sir! I think they are interchangeable but are they for US 84/85?
Also of interest to me is $$$.
Keep me (us) posted.
Thanks Pete.
Also of interest to me is $$$.
Keep me (us) posted.
Thanks Pete.
Ken's Garage
https://www.youtube.com/c/KensGarage1
https://www.youtube.com/c/KensGarage1
Re: Rearset interest
These will fit all the 350's. Let me get the details worked out and I'll let you guys know when I do. For my set I'm going to use a tube reservoir, but I can supply the line for the stock res. GP or conventional shift pattern as well.
I'll keep you guys up to speed.
Thanks
Pete
I'll keep you guys up to speed.
Thanks
Pete
- mountaincycle
- -----
- Posts: 179
- Joined: Sat May 04, 2013 4:03 pm
- Location: South Carolina
Re: Rearset interest
I'm interested too.. Price?
keep us posted.
thx, M
keep us posted.
thx, M
Re: Rearset interest
I would be interested as well!
85 Y/B, Toomey pipes, PWK 28's, JJH Needle #2, 45 pilot jet, 145 main, Pods, VForce 4 reed blocks, +3 ignition, Milled head 1.1mm squish, R6 Shock, Progressive
Many Vintage MX Bikes, 03 ZRX1200R, 86 Moto Guzzi 1000 Le Mans MK IV, 86 VFR 750, 74 GT 550
Many Vintage MX Bikes, 03 ZRX1200R, 86 Moto Guzzi 1000 Le Mans MK IV, 86 VFR 750, 74 GT 550
Re: Rearset interest
Defo interested subject to price of course :)
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
Re: Rearset interest
I'm interested. Set back and rise?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Cheers!
Pete
'12 Tuono V4R APRC, '05 R6, '88 RZ350, '82 XV920R
Pete
'12 Tuono V4R APRC, '05 R6, '88 RZ350, '82 XV920R
Re: Rearset interest
send a price when you get things ironed out ! Thanks
Re: Rearset interest
i would also be interested thanks
Re: Rearset interest
Def interested but how hard to do sets at standard spacing etc? My old knees couldn't handle being bent back that far for long lol. But they look trick!
- This old RZ
- Posts: 1773
- Joined: Sun Nov 27, 2005 12:04 am
- Location: So.Cal
Re: Rearset interest
Nice looking and minimalist. always interested,as with others after you talk to the machinist ...price. Rearsets are on the agenda for the final part of my build, but you never know I think your already safe for your "few" sets
I like them small and light, without passenger applications obviously. Looking good so far
I like them small and light, without passenger applications obviously. Looking good so far
HAPPY 30th YAMAHA YVPS 350 1983-2013. DONT OVER THINK IT , JUST BUILD IT AND BE JUST AS FAST AND RELIABLE
Re: Rearset interest
Thanks guys, old Rz, "keep it simple stupid" that's how I roll...
Looking to get to my machine guy within the next week for price to run a small batch. My cost is your cost, I'm not looking to make money here.
Rearsets use bearings on both sides in the levers, about half the weight of stockers, Brembo master, grooved pegs, not cross hatched, and use the stock exhaust attachment point.
They will be in mill finish, you can finish them to your preference.
I'll get these on a bike this weekend with pics and measurements with respect to back set and height.
Any suggestions or comments post 'em up.
Thanks
Pete
Looking to get to my machine guy within the next week for price to run a small batch. My cost is your cost, I'm not looking to make money here.
Rearsets use bearings on both sides in the levers, about half the weight of stockers, Brembo master, grooved pegs, not cross hatched, and use the stock exhaust attachment point.
They will be in mill finish, you can finish them to your preference.
I'll get these on a bike this weekend with pics and measurements with respect to back set and height.
Any suggestions or comments post 'em up.
Thanks
Pete
Re: Rearset interest
Looking good Peter, what did you decide on the other side?
A thought... Have you checked out a set of Tarozzis btw? I dont know how they work but Aaron did a mod to his that allowed you to move the brake back and up so you could kick it without hitting the brake lever. worth a look perhaps if youve not seen it.
A thought... Have you checked out a set of Tarozzis btw? I dont know how they work but Aaron did a mod to his that allowed you to move the brake back and up so you could kick it without hitting the brake lever. worth a look perhaps if youve not seen it.
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
Re: Rearset interest
JonW wrote:Looking good Peter, what did you decide on the other side?
A thought... Have you checked out a set of Tarozzis btw? I dont know how they work but Aaron did a mod to his that allowed you to move the brake back and up so you could kick it without hitting the brake lever. worth a look perhaps if youve not seen it.
Thanks Jon, Yes sir, I have a couple sets of Terozzi's, I cant stand them...Just my opinion , heavy, too many little parts, they get really sloppy or bind up. Never had a real good experience with them. Like you said, kick start comes way to close to the brake lever and side stand is too close to the shifter.
Thanks
Pete
Re: Rearset interest
Definitely interested