Needed: used OEM cotter pin for brake caliper pad retainer

General forum on frames, brakes, suspension, wheels and tires

Moderator: rztom

Post Reply
Message
Author
User avatar
Evans Ward
-----
-----
Posts: 1546
Joined: Sun Jun 07, 2009 6:39 pm
Location: Macon, GA

Needed: used OEM cotter pin for brake caliper pad retainer

#1 Post by Evans Ward » Tue Apr 22, 2014 1:48 pm

Does anyone have a used factory small cotter pin for the brake caliper pad retainer guide? Need only one. Can send you some postage money plus if one could mail me one in a standard envelope. Part can't be bought at Yamaha as it is not part of fische. Thanks!
84 RZ350-Toomeys,SCR milled head, stk 26 carbs,300 M, 35 P, stock regrooved needles AS 2.5 turns out,stk air box,Banshee reeds Zeel non-progr CDI,TSRL Program YPVS,alum rad,R6 shock,GV emulators w/RT springs,fork brace,Shindy steering damper.

User avatar
T.RexRacing
Posts: 1318
Joined: Fri Nov 01, 2013 8:34 pm
Location: back in the hills

Re: Needed: used OEM cotter pin for brake caliper pad retain

#2 Post by T.RexRacing » Tue Apr 22, 2014 5:06 pm

Front or rear?

Have you looked here?
There is only one difference between a madman and me. The madman thinks he is sane. I know I am mad.
Salvador Dali

silverstrom
Moderator
Moderator
Posts: 7030
Joined: Wed Mar 24, 2010 2:20 am

Re: Needed: used OEM cotter pin for brake caliper pad retain

#3 Post by silverstrom » Tue Apr 22, 2014 5:27 pm

Can you not just go to any hardware store and buy a stainless steel cotter pin of the approximate size? As long as the diameter is right you just cut to fit. Use a small drill bit to gauge diameter.

Post Reply