I want to replace the two joint seals on a 1985 RZ350N rear brake caliper. I already have all the OEM parts and seals. I found power house automotive in UK seems to have some that look like a good match. Anyone have a source closer?
Thanks
Splitting the rear brake caliper 85 RZ350N
Moderator: rztom
Splitting the rear brake caliper 85 RZ350N
1985 RZ350N
Original owner
Original owner
Re: Splitting the rear brake caliper 85 RZ350N
Hey Jim,
In Illinois too. Split mine 2 years ago and replaced them with these from mc master Carr. Double-Seal Viton[REGISTERED SIGN] Fluoroelastomer O-Ring, AS568A Dash Number 110
No problems at all. Order today and have them Thursday.
Hope it helps
Sent from my iPad using Tapatalk HD
In Illinois too. Split mine 2 years ago and replaced them with these from mc master Carr. Double-Seal Viton[REGISTERED SIGN] Fluoroelastomer O-Ring, AS568A Dash Number 110
No problems at all. Order today and have them Thursday.
Hope it helps
Sent from my iPad using Tapatalk HD
1984 RZ 350
Re: Splitting the rear brake caliper 85 RZ350N
Heck. Pm me your address and I will send you some in the mail
Sent from my iPad using Tapatalk HD
Sent from my iPad using Tapatalk HD
1984 RZ 350
- steveloomis
- -----
- Posts: 1507
- Joined: Tue Dec 06, 2011 11:18 am
- Location: Oklahoma USA
Re: Splitting the rear brake caliper 85 RZ350N
Is this a great forum or what? I'm sure he had to order a minimum order. I got some for my Toomey Replica spigots that the header pipe slips into. Had to order 25 minimum. If anyone needs a couple of those, let me know...
'81 RD350LC hybrid w/84 RZ engine. Zeel, Old style Toomeys, Yboot and filter 420 main 22.5 pilot, Air screw 2.5 turns out, DJ needle 2nd from top, Canadian VM26 carbs.
'85 KR/RZ US. Tank is seeping causing a blister in paint.....
'85 KR/RZ US. Tank is seeping causing a blister in paint.....
Re: Splitting the rear brake caliper 85 RZ350N
Crnadvm – thanks for the quick reply and generous offer. I repair hydraulic components for a living and just happen to have a few of these in the shop. Steve this is a fantastic forum. There is a huge amount of information you can search from and if you can’t find it post a question. This is a perfect place for guys like me who can do the work but don’t have the “insider” information an experienced mechanic or fanatic has.
1985 RZ350N
Original owner
Original owner
Re: Splitting the rear brake caliper 85 RZ350N
Do you mean the part that bolts to the cylinder? I have some but they are not in the best of shape.... PM me some details if you don't mind!steveloomis wrote:Is this a great forum or what? I'm sure he had to order a minimum order. I got some for my Toomey Replica spigots that the header pipe slips into. Had to order 25 minimum. If anyone needs a couple of those, let me know...
85 RZ350
88 YSR50
82 RD350LC (Current project)
06 Triumph Daytona 675 (track toy)
97 Honda RS125 (race bike #1)
99 Aprilia RS250 (race bike #2)
89 RGV250 VJ21
85 RG500
85 RZ350 Hybrid
86 GSXR750
88 YSR50
82 RD350LC (Current project)
06 Triumph Daytona 675 (track toy)
97 Honda RS125 (race bike #1)
99 Aprilia RS250 (race bike #2)
89 RGV250 VJ21
85 RG500
85 RZ350 Hybrid
86 GSXR750
-
- Posts: 25
- Joined: Fri Jun 27, 2014 3:06 pm
Re: Splitting the rear brake caliper 85 RZ350N
I just installed a set in a project I'm working on.
Hope this helps, they are not the squared off rings but they work.
AS568A-110 o-rings from mc mastercarr.
Or if you know someone in aviation.
AS3209-110 or ms 28775-110
Speed
Hope this helps, they are not the squared off rings but they work.
AS568A-110 o-rings from mc mastercarr.
Or if you know someone in aviation.
AS3209-110 or ms 28775-110
Speed