Use a grease gun, just take the nipple adapter off and you should be able to get a couple threads into the caliper. I've done this with several seized pistons on LCs and it's worked every time, even on heavy rust. I'm just not sure all grease guns have the same end.LC Cnd wrote:3 sounds like the way to go. My next issue is ceased caliper pistons - they are seated all the way in and there is nothing to grab on to. I was advised heat would be the last option followed by 100 psi to possibly pop them lose or soak everything in tranny oil. Thought diesel or kerosin would be better then replace the seals. What's best?
Brake fluid: Dot 3 vs Dot 5
Moderator: rztom