Bought an '89 FZ600 swinger off E-Bay last night.
Moderator: rztom
Bought an '89 FZ600 swinger off E-Bay last night.
I've been searching for one of these for quite while. I found it in the UK, paid $62.++ CND for it. Will cost me about $150 with shipping. I'm pretty stoked about it.
Now I can start sourcing a front end and wheels. I have the R6 shock as well. This will be for my superstreet build.
I want to run 17's front and back. I'm partial to the 3 spoke units out there. Front wheels are plentiful. What rear 17" wheel is available? Do I have to go with an R1?
Now I can start sourcing a front end and wheels. I have the R6 shock as well. This will be for my superstreet build.
I want to run 17's front and back. I'm partial to the 3 spoke units out there. Front wheels are plentiful. What rear 17" wheel is available? Do I have to go with an R1?
Rory
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
Re: Bought an '89 FZ600 swinger off E-Bay last night.
Rory, older gsxr wheel is the one you probably want to use. 89 gsxr 750 is probably the one you want with a gs 500 cush drive
Pete
Pete
Re: Bought an '89 FZ600 swinger off E-Bay last night.
Check out uncledirty's project. He's using the fz swinger and gsxr rear wheel
Pete
Pete
Re: Bought an '89 FZ600 swinger off E-Bay last night.
hmm... Rory, why didnt you ask me? I still have a FZ600 swinger for sale in Florida, with wheel, brake etc etc and comes with R6 front end, also with brakes, wheel, triples etc. If anyone wants this lot it would be cheaper than buying piecemeal for sure...
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
-
- Posts: 67
- Joined: Thu Jan 02, 2014 9:06 pm
Re: Bought an '89 FZ600 swinger off E-Bay last night.
I went with the `89 GSXR750 rear wheel and GS500 cush. The Katana 600 of the same era used the same rear wheel. I've seen a few bikes using a first gen SV650 rear wheel if you want to run the strait spoke wheels which are lighter.
I wanted to have a matching wheels, so I went with a `91 GSXR750/1100 front. I wanted radial brakes and better forks than the first gen R1, so I'm using `04 GSXR600 forks with `98-01 R1 triples. The rotor spacing is spot on and no need to shim the rotors out. The gixxer forks have a 25mm axle, so you need to do a bearing swap and make a new inner hub spacer, and the two outer wheel spacers. You also need to shim the calipers out 5mm as the early 750/1100 rotors are 310mm. You can use washers, but I made 5mm spacers for a cleaner look. It's an easy install.
I wanted to have a matching wheels, so I went with a `91 GSXR750/1100 front. I wanted radial brakes and better forks than the first gen R1, so I'm using `04 GSXR600 forks with `98-01 R1 triples. The rotor spacing is spot on and no need to shim the rotors out. The gixxer forks have a 25mm axle, so you need to do a bearing swap and make a new inner hub spacer, and the two outer wheel spacers. You also need to shim the calipers out 5mm as the early 750/1100 rotors are 310mm. You can use washers, but I made 5mm spacers for a cleaner look. It's an easy install.
Re: Bought an '89 FZ600 swinger off E-Bay last night.
Great info, thanks a million guys!
Jon, I'm very interested. I have 5 rollers. Who do I contact for shipping?
Jon, I'm very interested. I have 5 rollers. Who do I contact for shipping?
Rory
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
Re: Bought an '89 FZ600 swinger off E-Bay last night.
Drop me a PM and I'll hook you up with the guy who is storing them.
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
Re: Bought an '89 FZ600 swinger off E-Bay last night.
I used an FZR600 front and rear. Front is a bit dated but at least it is dual caliper. Three spokes and cheap!
Re: Bought an '89 FZ600 swinger off E-Bay last night.
That's perfect. Looks really good. I may have Jon's parts coming, old R6 regular forks, GSXR rear wheel, both 3 spoke, still waiting for a shipping quote. I will keep my eyes peeled for the old FZ600 stuff though. I have 5 rollers to work with.
Rory
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
Re: Bought an '89 FZ600 swinger off E-Bay last night.
Got to be a win there!The fzr forks are bigger diameter too arent they?Beefier?
Re: Bought an '89 FZ600 swinger off E-Bay last night.
L.B wrote:Got to be a win there!The fzr forks are bigger diameter too arent they?Beefier?
FZR600 forks are 38mm
I believe the old-style R6 forks are a bit bigger than that.
Ken's Garage
https://www.youtube.com/c/KensGarage1
https://www.youtube.com/c/KensGarage1
Re: Bought an '89 FZ600 swinger off E-Bay last night.
I think the R6 forks are bigger than the 38mm of the FZ.
Last night I purchased an R6 shock on EBay, and I'm impressed with their new format. The swinger and the shock had final prices that are calculated by EBay, as shipped from their hub location. It takes away from the goofy shipping prices you used to see that varied so much. The shock was $10 US+$40 US for shipping. Not too bad. Shock delivered for $60CND.
The swinger was $62CND and cost me $150CND inclusive, delivered.
Overall, I'm really happy.
Last night I purchased an R6 shock on EBay, and I'm impressed with their new format. The swinger and the shock had final prices that are calculated by EBay, as shipped from their hub location. It takes away from the goofy shipping prices you used to see that varied so much. The shock was $10 US+$40 US for shipping. Not too bad. Shock delivered for $60CND.
The swinger was $62CND and cost me $150CND inclusive, delivered.
Overall, I'm really happy.
Rory
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
Re: Bought an '89 FZ600 swinger off E-Bay last night.
Hi,
The R6 Fork has 43mm... I used it in my Bike as the Fz600 Swinger:
BYE
Peter
The R6 Fork has 43mm... I used it in my Bike as the Fz600 Swinger:
BYE
Peter
Re: Bought an '89 FZ600 swinger off E-Bay last night.
MAN I LOVE THAT BIKEPeter A wrote:Hi,
The R6 Fork has 43mm... I used it in my Bike as the Fz600 Swinger:
BYE
Peter
Ken's Garage
https://www.youtube.com/c/KensGarage1
https://www.youtube.com/c/KensGarage1