I've had the MC on my 4LO apart for a while and purchased a rebuild kit. I can't for the life of me remember the order the black rubber cup goes into the MC. Does it go in first followed by the spring and then the plunger? or does the spring go in and then the cup? I added pics to assist me in the explanation. BTW that's the old mc set in the pics
this way?
or this way?
I feel a little embarrassed asking this but its been a few years (26yrs exactly) since they've been apart and googling didn't help. thanks for the help in advance
Norm
MC rebuild kit help
Moderator: rztom
-
- Posts: 61
- Joined: Wed Jan 09, 2013 1:16 pm
- Location: Montreal, Quebec
Re: MC rebuild kit help
Pics are not showing here.
Rory
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
Re: MC rebuild kit help
Spring, cup, plunger.
-
- Posts: 61
- Joined: Wed Jan 09, 2013 1:16 pm
- Location: Montreal, Quebec
Re: MC rebuild kit help
Don't know why pics are not appearing.solo 2 wrote:Spring, cup, plunger.
Thanks for the help. I thought it was in that order but I wanted to be sure.