Fork choice?
Moderator: rztom
Re: Fork choice?
I rode a CBR500R and thought it was closer to the RZ than any other new bikes I have ridden, at least in terms of handling and braking. It felt underpowered but was easy to ride and felt light and nimble. It runs a 160/60 rear and 120/70 front.
Re: Fork choice?
I sat on a CB500F, so didn't get the riding experience, but I kind of thought the same thing. It felt compact and fit me. But there are a million of them out there and they don't wail like a 2-stroke.
So maybe I should try the 3.5" wheel I have, with a 120 tire, and if it handles too slow I can always change it.
Ordered a Katana wheel off eBay yesterday - $21.45USD! Even with conversion to CDN and shipping, it's pretty cheap. Hope it's OK. Will need a GS500 cush drive but that should be easy enough to find.
Anyway, it's 4.5" wide, so I was thinking a 150 tire should work and keep the handling fairly quick.
So maybe I should try the 3.5" wheel I have, with a 120 tire, and if it handles too slow I can always change it.
Ordered a Katana wheel off eBay yesterday - $21.45USD! Even with conversion to CDN and shipping, it's pretty cheap. Hope it's OK. Will need a GS500 cush drive but that should be easy enough to find.
Anyway, it's 4.5" wide, so I was thinking a 150 tire should work and keep the handling fairly quick.
RD400F RD400G RD350LC RZ350
-
- Posts: 197
- Joined: Sun Oct 14, 2012 9:45 pm
- Location: Spokane WA
- Contact:
Re: Fork choice?
I am running a 150/ 60 on the rear on a vj23 wheel fits grate in the vj21 swing arm had to make up a spacer for the right side
- Attachments
-
- 010.JPG (220.2 KiB) Viewed 2912 times
1984 RZ350
1978 RD 400
1979 Daytona
1978 RD 400
1979 Daytona
-
- Posts: 197
- Joined: Sun Oct 14, 2012 9:45 pm
- Location: Spokane WA
- Contact:
Re: Fork choice?
running a 110/70 front tire that would be stock for a vj22 i think it will go out to 120 not sher on that
1984 RZ350
1978 RD 400
1979 Daytona
1978 RD 400
1979 Daytona
Re: Fork choice?
120X60 not 120X70
1991 3MATZR250SP
!993 3XVTZR250SP
1996 RGV250(Lucky Strike)
1994 MC28SP
1995 MC28SP
1996 MC28SP
1985 RG500(Walter Wolfe)
1984 IT490
1985 RZV500R
1985 NS400R
1985 NS400R
1997 VFR750
1992 FZR1000
RGV400
TZR500
TZR350
1990 RZ350
1971 Porsche911S
!993 3XVTZR250SP
1996 RGV250(Lucky Strike)
1994 MC28SP
1995 MC28SP
1996 MC28SP
1985 RG500(Walter Wolfe)
1984 IT490
1985 RZV500R
1985 NS400R
1985 NS400R
1997 VFR750
1992 FZR1000
RGV400
TZR500
TZR350
1990 RZ350
1971 Porsche911S
Re: Fork choice?
giron wrote:120X60 not 120X70
120/60 = lower profile = smaller diameter = quicker handling? Is that why you're saying 120/60 not 120/70 Giron?
RD400F RD400G RD350LC RZ350
Re: Fork choice?
yes
1991 3MATZR250SP
!993 3XVTZR250SP
1996 RGV250(Lucky Strike)
1994 MC28SP
1995 MC28SP
1996 MC28SP
1985 RG500(Walter Wolfe)
1984 IT490
1985 RZV500R
1985 NS400R
1985 NS400R
1997 VFR750
1992 FZR1000
RGV400
TZR500
TZR350
1990 RZ350
1971 Porsche911S
!993 3XVTZR250SP
1996 RGV250(Lucky Strike)
1994 MC28SP
1995 MC28SP
1996 MC28SP
1985 RG500(Walter Wolfe)
1984 IT490
1985 RZV500R
1985 NS400R
1985 NS400R
1997 VFR750
1992 FZR1000
RGV400
TZR500
TZR350
1990 RZ350
1971 Porsche911S