Front Brake Caliper Pad Bolt Removal (84 RZ350)
Posted: Fri Jul 01, 2016 2:17 am
Can't seem to get the bolt loose that holds the pads in the caliper.
Thus far I've tried soaking in WD-40 and Liquid Wrench.
I applied just a bit of heat with a propane torch. (not a lot of heat)
Then I used an impact allen socket.
Still can't get that bolt to budge.
Any suggestions???
The link below is not my caliper. Just using it to show the bolt in question.
http://www.scooterhelp.com/RZ_help/rest ... brake2.jpg" onclick="window.open(this.href);return false;
Thanks
Boyd
Thus far I've tried soaking in WD-40 and Liquid Wrench.
I applied just a bit of heat with a propane torch. (not a lot of heat)
Then I used an impact allen socket.
Still can't get that bolt to budge.
Any suggestions???
The link below is not my caliper. Just using it to show the bolt in question.
http://www.scooterhelp.com/RZ_help/rest ... brake2.jpg" onclick="window.open(this.href);return false;
Thanks
Boyd