Gonna do just that!
Soon as I have a chance....
Its mostly a matter of breaking it free initially...
So just chisel carefully...
I saw a vid of it on 'tube.. by one of the major parts outlets... they used store bought expensive tools for every other operation... so chisel on race is considered kosher..
Thanks!
All Balls , bearing conv kit question.
Moderator: rztom
Re: All Balls , bearing conv kit question.
Just nudge hard, no hacking needed.
Rory
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
Re: All Balls , bearing conv kit question.
If you run a bead around the center of the race with a mig welder, the race contracts when the weld cools and if it doesnt just pop out, it will come out with the gentlest of taps with a chisel etc.
Re: All Balls , bearing conv kit question.
I've done this. Very slick.evso wrote:If you run a bead around the center of the race with a mig welder, the race contracts when the weld cools and if it doesnt just pop out, it will come out with the gentlest of taps with a chisel etc.
Rory
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine