RZ/RD 350 & Misc. 2-Stroke Tech BBS

Technical Forums for Two-Stroke Nuts
It is currently Tue Oct 16, 2018 5:10 am

All times are UTC - 4 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Thu Feb 08, 2018 6:19 pm 
Offline

Joined: Wed Mar 09, 2011 7:39 pm
Posts: 48
Hi forum :smt041

Messing with left clip-on, removed the clutchlever and wire...

Remounting wire and lever... and the clucth is hanging and there is no tension on the wire!!!... :smt010

What/how can i get the clutch released again?? :smt017

Regards Stig


Top
 Profile  
Reply with quote  
PostPosted: Thu Feb 08, 2018 8:35 pm 
Offline

Joined: Mon Mar 03, 2014 8:44 pm
Posts: 2873
Location: Alberta, Canada
Hi Stig, check the cable (wire) at the clutch arm end. (Under the carbs). It will often come off there when you remove the lever.

_________________
Rory


Top
 Profile  
Reply with quote  
PostPosted: Thu Feb 08, 2018 9:39 pm 
Offline

Joined: Wed Mar 09, 2011 7:39 pm
Posts: 48
The cable and lever is fine...

It is like the clutch has been "over pulled" when i was dismounting the cable and the clutch has locked and wont release itself again...

The clucth arm didn´t return after tension.

Hope it makes sense... Engwish not first lagunes :smt002


Top
 Profile  
Reply with quote  
PostPosted: Fri Feb 09, 2018 1:29 am 
Offline

Joined: Mon Mar 03, 2014 8:44 pm
Posts: 2873
Location: Alberta, Canada
I'd drop the oil and pull the case. You might have broken plates.

_________________
Rory


Top
 Profile  
Reply with quote  
PostPosted: Sun Feb 11, 2018 10:44 pm 
Offline

Joined: Wed Mar 09, 2011 7:39 pm
Posts: 48
Hmm... Ok, i will report back what happend


Top
 Profile  
Reply with quote  
PostPosted: Sat Sep 08, 2018 8:14 am 
Offline

Joined: Wed Mar 09, 2011 7:39 pm
Posts: 48
Completly forgot about returning with the clutch issue and solution :smt015

When removing the clip on´s, i heard a little noise... like when your dropping a 5mm nut to the floor, you didn´t see were it landed and start to wonder if you heard rigth, because the sound has nothing to do with the work your doing... Yes?? :smt048

I grabbed my Haynes manual, read about the clucth adjustment, dismantling and removing the clutch, got my tool and on with it... :smt038

I ended up with doing it five times :smt042

Step by step, before deciding that there is nothing wrong with the clutch... i have done it rigth according to the book :smt017

Thinking very hard about it :smt017 I remembered the litle noise i had heard and whent backwards to where it all startet and looking at the lever and cableadjuster...cable beeing ca. 1cm to long.... :smt018

Was that the sound???... and extra customized cable adjuster, that i made years ago do to the long cable...FUUUUUUUUUCK ME!!!! :smt021 :smt021

No further questions your Honor :smt086

The clutch is now in a god working order :smt002 :smt023


Top
 Profile  
Reply with quote  
PostPosted: Sat Sep 08, 2018 5:25 pm 
Offline
Moderator
Moderator

Joined: Wed Mar 24, 2010 2:20 am
Posts: 6504
Location: Eastern Ontario, Canada
Lol...funny how memory fails us as times.

_________________
1985 RZ500
1985 RZ500 Project Bike
1986 RG500 ATR
1986 NS400R
1987 TZR250
1988 Honda RC31
2007 DL650 VStrom
2014 Triumph Thruxton Modified


Top
 Profile  
Reply with quote  
PostPosted: Sun Sep 09, 2018 1:10 pm 
Offline

Joined: Mon Mar 03, 2014 8:44 pm
Posts: 2873
Location: Alberta, Canada
Glad you got it all worked out.

_________________
Rory


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 4 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group