This new mini phone, won't show any attachments, gotta change some settings.
No YPVS means just one less issue to worry about., ebetter yet! The bike will likley still have low end performance issues to some extent, Good thing is if he never had power valves...he just won't know what he's missing. Ive ridden dozens of stovk & stroked non pv Banshees, 250Rs, etc..until you ride a PV equipped version ignorance is bliss Regardless It will still be a super fun machine once he gets it sorted. Outside of the YPVS everything members have posted still applies. Hopefully he posts updates as he goes, everything is there for a really nice RZ frankenbike.
nubie with help neeed
Moderators: rztom, silverstrom
- Questo vecchio rz
- Posts: 1116
- Joined: Sun Aug 16, 2015 5:55 pm
- Location: Reconquista of California
Re: nubie with help neeed
Banshee (Baja) race bike,+ 2 A Arms,L.E.Ds, Toomey, +4 stroker IMS tank, run flats.
96 GSXR SRAD, Future Yoshimura rep.
85 custom Tri-Z
RZ/YZR bike(project)
86 VFR750 RC24 Merkel replica (project)
Royal Enfield Bullet 500
96 GSXR SRAD, Future Yoshimura rep.
85 custom Tri-Z
RZ/YZR bike(project)
86 VFR750 RC24 Merkel replica (project)
Royal Enfield Bullet 500
Re: nubie with help neeed
Hey hey hey
so it got started and it I took it down my block and it is very toppy. the throttle cable are a bit of a problem at the moment the cabling is hitting the frame and im not sure how to solve it.. running now..and it will eventually stall out if the pitcock is not in the PRI position.
I wonder about the insides .. I took a mirror and a flashlight to the spark plug chamber and there was the cylinder of course... on the top I saw a round machined spot .. after google images for hours Im thinking this machine has different pistons ..looks like the forsetti top, I also found the second previous owners registration and googled the name found a listing and whalla I spoke to someone that knew who he was now just waiting for a callback... from so cal to sacramento to so cal again...
so it got started and it I took it down my block and it is very toppy. the throttle cable are a bit of a problem at the moment the cabling is hitting the frame and im not sure how to solve it.. running now..and it will eventually stall out if the pitcock is not in the PRI position.
I wonder about the insides .. I took a mirror and a flashlight to the spark plug chamber and there was the cylinder of course... on the top I saw a round machined spot .. after google images for hours Im thinking this machine has different pistons ..looks like the forsetti top, I also found the second previous owners registration and googled the name found a listing and whalla I spoke to someone that knew who he was now just waiting for a callback... from so cal to sacramento to so cal again...
- Questo vecchio rz
- Posts: 1116
- Joined: Sun Aug 16, 2015 5:55 pm
- Location: Reconquista of California
Re: nubie with help neeed
Dude, I apologize somehow I was replying to a completley diffrent post? Very similar posting , but today when I read through this thread it's (completley) diffrent with many diffrent replies? I have no clue what happened here..
I dont even see that thread on this forum, & your bike is not even modified like the one I was replying to
However, the basics are the same and it appears you are on your way.
I dont even see that thread on this forum, & your bike is not even modified like the one I was replying to
However, the basics are the same and it appears you are on your way.
Banshee (Baja) race bike,+ 2 A Arms,L.E.Ds, Toomey, +4 stroker IMS tank, run flats.
96 GSXR SRAD, Future Yoshimura rep.
85 custom Tri-Z
RZ/YZR bike(project)
86 VFR750 RC24 Merkel replica (project)
Royal Enfield Bullet 500
96 GSXR SRAD, Future Yoshimura rep.
85 custom Tri-Z
RZ/YZR bike(project)
86 VFR750 RC24 Merkel replica (project)
Royal Enfield Bullet 500
Re: nubie with help neeed
Just connect the free connection on the carb to the free small diameter connection on the fuel petcock.spicy wrote:.. running now..and it will eventually stall out if the pitcock is not in the PRI position.
It's what I told you before.
Bye
Martin
Martin
Re: nubie with help neeed
I wonder about the size of the carbs on this machine now .. 34mm mikuni vm round slides for a smaller carb .. Maybe up for a trade if anyone here is interested
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: nubie with help neeed
Thanks for all the help here you everyone is great on the 411.. Just gotta install a fuel cutoff to prevent the vacuum tank flooding the engine.. Any thoughts on smaller carbs ..
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk