I've got a 1988 rz350 that I'm getting put back together and on the road. I'd like to get a idea where to start out on main jet size. It's a 1988 rz350 Canadian model, 1ua power jet carbs, 2 into 1 y boot intake with a uni air filter, and DG pipes. My elevation is 880-890 ft. My bike was set up with k&n pod filters and it now has 230 mains, 27.5 pilot (stock) and stock needle on the middle clip. Any help appreciated.
Earl
1988 rz350 jetting baseline
Moderators: rztom, silverstrom
-
- Posts: 18
- Joined: Fri Apr 08, 2016 9:28 pm
- Location: Ontario Canada
-
- Posts: 18
- Joined: Fri Apr 08, 2016 9:28 pm
- Location: Ontario Canada
Re: 1988 rz350 jetting baseline
Nobody? I was hoping to order a selection of jets without going overboard and getting a bunch that I won't end up needing