1988 rz350 jetting baseline

Central location for technical tips and information

Moderators: rztom, silverstrom

Post Reply
Message
Author
Misfitmechanic
Posts: 18
Joined: Fri Apr 08, 2016 9:28 pm
Location: Ontario Canada

1988 rz350 jetting baseline

#1 Post by Misfitmechanic » Wed May 25, 2016 1:37 pm

I've got a 1988 rz350 that I'm getting put back together and on the road. I'd like to get a idea where to start out on main jet size. It's a 1988 rz350 Canadian model, 1ua power jet carbs, 2 into 1 y boot intake with a uni air filter, and DG pipes. My elevation is 880-890 ft. My bike was set up with k&n pod filters and it now has 230 mains, 27.5 pilot (stock) and stock needle on the middle clip. Any help appreciated.
Earl

Misfitmechanic
Posts: 18
Joined: Fri Apr 08, 2016 9:28 pm
Location: Ontario Canada

Re: 1988 rz350 jetting baseline

#2 Post by Misfitmechanic » Thu May 26, 2016 7:53 pm

Nobody? I was hoping to order a selection of jets without going overboard and getting a bunch that I won't end up needing

Post Reply