Fuel level

Central location for technical tips and information

Moderators: rztom, silverstrom

Post Reply
Message
Author
ron
Posts: 103
Joined: Fri Sep 06, 2013 4:51 pm

Fuel level

#1 Post by ron » Sat Jul 02, 2016 3:08 pm

Hello
Has set the float height to 21mm without gasket. Have put the bike on the center stand.. run over drain hose up along the back of the carburetor.. then opens the drain screw and lands as approximately of the washers.

Look at the picture

Does it look correct?

Ron
Attachments
l.jpg
l.jpg (72.26 KiB) Viewed 1959 times

User avatar
b52fer
Posts: 23
Joined: Thu Jul 08, 2004 3:31 pm
Location: Malaga, souht of Spain, Europe
Contact:

Re: Fuel level

#2 Post by b52fer » Sun Aug 28, 2016 5:29 am

Hi.
The correct level is this.

Image

Regards.

Post Reply