Good morning
I am getting ready to fire up the old girl for the first time. I wanted to verify some routing of wires and hoses before I do. I have the clutch clamp that holds the clutch cable to the top of the engine case and there is an arm with a loop in one end attached to this. What does this hold? I have the stator wire running under the clutch cable and between the clamp and the barrels of the engine. I need to run the oil line from the reservoir to the injector pump. Which route does the hose take for that? 1989 RZ350 F2. Thanks very much.
Hose and wire routing
Moderators: rztom, silverstrom
-
- Posts: 84
- Joined: Mon Dec 07, 2015 10:15 am
- Location: Milton, Ontario
Re: Hose and wire routing
You may find your answers here.kampinguru wrote:Good morning
I am getting ready to fire up the old girl for the first time. I wanted to verify some routing of wires and hoses before I do. I have the clutch clamp that holds the clutch cable to the top of the engine case and there is an arm with a loop in one end attached to this. What does this hold? I have the stator wire running under the clutch cable and between the clamp and the barrels of the engine. I need to run the oil line from the reservoir to the injector pump. Which route does the hose take for that? 1989 RZ350 F2. Thanks very much.
http://www.rd350lc.net/ComplementManuelAtelier1WT.pdf
-
- Posts: 84
- Joined: Mon Dec 07, 2015 10:15 am
- Location: Milton, Ontario
Re: Hose and wire routing
Thank you for the PDF. I have that one and it does not really show the two things I am looking for.